Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | Fan current | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | Low-noise design | Number of poles | Impeller diameter | Impeller width | Frequency | Power | Air capacity | IP Code | Modification | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Fan power | Sound pressure level at 3 m | Current | Sound pressure level at 3 m | Engine Type | Voltage | Frequency | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | SEC class* | Number of intake spigots | Sound- and heat-insulated casing | Low-powered motor | Casing height | Grille is available | External rotor | High powered external rotor motor | Two-speed with external rotor | Exhaust flange diameter | Intake flange diameter | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz | - | 0.47 | - | - | - | - | - | 47 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 108 | - | - | - | 230 | 865 | 2560 | 4.3 | 1 | - | 50 | - | - | - | - | - | - | - | - | - | B | - | 250 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | 0.59 | - | - | - | - | - | 48 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 135 | - | - | - | 230 | 930 | 2570 | 4.3 | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 250 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | 220 | - | - | 1400 | 52 | - | IP X4 | 27.77 | - | - | - | - | - | - | - | 1 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +45 | 2470 | - | - |
60 Hz | - | - | 230 | 310 | - | - | 1450 | 52 | - | IP X4 | 27.77 | - | - | - | - | - | - | - | 1 | - | 4 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 1.38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +40 | 2510 | - | - |
50 Hz | - | - | 230 | 75 | - | 435 | - | 36 | - | IP X4 | 6.4 | - | - | 2690 | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.33 | -25...+55 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 76 | - | 435 | - | 37 | - | IP X4 | 6.4 | - | - | 2720 | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.33 | -25...+55 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 171 | - | - | 2600 | 52 | - | IP X4 | 7.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | exhaust , supply | outdoor mounting , wall mounting , Inline | - | 1400 | - | 0.77 | -25 +50 | - | - | no | no | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 570 | - | - | 1270 | 44 | - | IP X4 | 40.5 | - | - | - | - | - | - | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 250 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.94 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | -20 … +40 | 1850 | - | - |
- | - | - | 400 | 1430 | - | - | - | 58 | - | IP X4 | 56 | - | - | 1375 | - | 7940 | 7200 | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 3.00 | -40 +80 | - | - | - | no | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 98 | - | 555 | 2705 | 47 | - | IP X4 | 4.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 150 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | exhaust , supply | outdoor mounting , wall mounting , Inline | - | - | - | 0.43 | -25...+55 | - | - | no | no | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 755 | - | - | - | - | - | - | - | - | - | - | 1.50 | - | 1440 | 57 | - | - | - | - | - | 4 | - | - | - | - | - | IP X4 | - | 400 | - | - | 45.5 | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30 … +50 | 5920 | - | - |
- | - | - | 230 | 115 | - | 520 | 1280 | 42 | - | IP X2 | 8.7 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | FFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.84 | 150 | - | - | - | - | - | - | yes | - | - | - | no | no | no | - | - | - | - | - | - | - |
- | - | - | 230 | 65 | - | 250 | - | 51 | - | IP X4 | 2.2 | - | - | - | - | - | - | 125 | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | 256 | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | 125 | no | - | - | plastic | - | no | for round air ducts | centrifugal | , | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 204 | - | 612 | - | 68 | 25 +50 | IP X4 | 4.2 | - | - | - | - | - | - | - | 1 | - | 2 | 160 , 240 | 62 | 60 | - | - | - | - | - | - | - | - | - | 687.5 | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 311 | - | 1680 | 940 | 41 | - | IP X4 | 31.3 | - | - | - | - | - | - | - | 1 | - | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 1.36 | -20 +50 | - | - | - | yes | - | 1 | yes | - | - | - | - | - | - | - | 250 | 250 | - | - | - | - |
- | - | - | 400 | - | - | 3500 | 1470 | 51 | - | IP 54 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1500 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 380-480 | 2360 | - | - | - | 50 | - | IP X4 | 60.5 | - | - | 1540 | - | 13600 | 12920 | - | 3 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 560 | yes | - | - | aluzinc , aluminium | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 3.65 | -25 +60 | - | - | - | no | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | 3310 | - | - | - | IP X4 | - | - | - | 1480 | - | - | - | - | 1 | - | 4 | - | - | - | - | - | - | - | - | - | - | 35 | - | - | - | 578 | 49 | - | - | - | 230 | 50/60 | - | - | - | - | 355 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 3.42 | 60 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 380 | 780 | - | 6720 | 948 | 54 | - | IP X4 | 123 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 1.60 | -25...+55 | - | - | - | no | - | - | yes | no | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 700 | - | - | 710 | 61 | - | IP 24 | 33 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12000 | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | - | - | 2966 | 948 | 47 | - | IP 54 | 87 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 357 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Speed 1 | - | - | 230 | 98 | - | - | 750 | 45 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | 7.7 | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | - | - | 0.43 | 50 | - | - | - | - | - | 1 | - | - | 207 | no | - | - | - | - | - | - | - | 356 | - | - |
Speed 2 | - | - | 230 | 122 | - | - | 870 | 46 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | 7.7 | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | - | - | 0.56 | 50 | - | - | - | - | - | 1 | - | - | 207 | no | - | - | - | - | - | - | - | 533 | - | - |
- | - | - | - | - | - | - | - | - | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 192 | 1190 | - | - | 200-277 | - | 3010 | - | 1 | - | 50/60 | - | - | 1.43 | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - |
- | 1110 | - | - | - | - | - | - | - | - | - | - | 2.42 | - | 957 | 64 | - | - | - | - | - | 6 | - | - | - | - | - | IP X4 | - | 400 | - | - | 81 | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12640 | - | - |
- | - | 0.96 | - | 121 | - | 1210 | - | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | 1210 | - | - | 230 | - | 3100 | 8.2 | - | - | 50/60 | - | - | - | 47 | - | - | - | - | - | - | IP44 | 200 | yes | - | - | galvanized steel | no | yes | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 336 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - |
- | 164 | - | - | - | - | - | - | - | - | - | - | - | 1.25 | 3310 | 54 | - | - | - | - | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 8 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | aluminium | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 1500 | IP55 | - |
50 Hz | - | - | 1~ 220-240 | 42 | - | 230 | 2732 | 35 | - | IP X4 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | IP44 | 100 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.19 | -25...+55 | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 51 | - | 250 | 3258 | 36 | - | IP X4 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | IP44 | 100 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.23 | -25 +50 | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | 155 | - | - | - | - | - | - | - | - | - | - | 0.29 | - | 1410 | 47 | - | - | - | - | - | 4 | - | - | - | - | - | IP X4 | - | 400 | - | - | 19 | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2300 | - | - |
60 Hz | 202 | - | - | - | - | - | - | - | - | - | - | 0.32 | - | 1550 | 48 | - | - | - | - | - | 4 | - | - | - | - | - | IP X4 | - | 400 | - | - | 19 | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2442 | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Basic parameter for domestic fan selection