Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Protection rating | Weight | A | RPM | Noise level at 3 m | Phase | Number of poles | Frequency | Speed | Current | Power | IP Code | Voltage | Maximum air capacity | RPM | Weight | Phase | Type | Frequency | Current | Protection rating | SEC Class | Power | SEC Class | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Maximum air capacity | Current | Max. transported air temperature | Current | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | High-power version | SEC class* | Number of intake spigots | Sound- and heat-insulated casing | Low-powered motor | Casing height | Grille is available | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | 230 | 335 | 730 | - | 37.9 | IP X4 | 6.28 | - | 2600 | - | 1 | 2 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 160 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | 1.16 | -25 +40 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 1~ 220-240 | 85 | 553 | 2600 | 50 | IP X4 | 6.60 | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 160 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | 0.38 | -25 +40 | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 1~ 220-240 | 107 | 610 | 2810 | 52 | IP X4 | 6.60 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 160 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | 0.47 | -25 +40 | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 743 | - | 940 | 46 | IP X4 | 72 | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | 1.47 | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | -20 … +70 | 3310 | - | - |
- | - | - | 230 | 163.7 | - | 2510 | 40 | IP X4 | - | - | - | - | 1 | - | 50/60 | - | 1.34 | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 250 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | -25 +60 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | 1145 | - | - |
min | - | - | 230 | 106 | 390 | 700 | 22 | IP X4 | 20.5 | - | - | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 200 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | yes | no | 98 | - | - | - | - | - |
max | - | - | 230 | 123 | 630 | 1200 | 38 | IP X4 | 20.5 | - | - | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 200 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | 0.59 | - | - | - | - | - | - | - | - | - | - | - | - | yes | no | 97 | - | - | - | - | - |
- | - | - | 230 | - | 1970 | 2826 | - | IP X4 | 19.8 | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 284 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | 1.25 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | - | 4695 | 3125 | 53 | IP 54 | 61 | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1531 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7.35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | - | 5345 | 3384 | 55 | IP 54 | 61 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2816 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11.92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 2.32 | - | - | - | - | 47 | IP X4 | - | - | - | - | - | - | - | - | - | 531 | - | 200-277 | 3053 | 2360 | 47 | 1 | - | 50/60 | - | - | - | - | - | - | - | 315 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 101.6 | - | 2580 | - | IP X4 | - | - | - | - | 1 | - | 50/60 | - | 0.83 | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 200 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | -25 +60 | - | 37 | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | 700 | - | - |
- | 324 | - | - | - | - | - | - | - | - | 1.42 | 2620 | 58 | - | 2 | - | - | - | - | IP X4 | 230 | - | - | 13 | 1 | - | 50 | - | - | - | - | - | - | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2150 | - | - |
- | - | - | 230 | 704 | - | 2206 | 67 | IP X4 | 18.7 | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | 3.13 | -25 +60 | - | - | no | - | no | - | - | - | - | - | - | - | - | - | - | - | 4790 | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 1~ 220-240 | 127 | 710 | 2760 | 48 | IP X4 | 4.8 | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | IP44 | 150 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , wall mounting , Inline | - | 0.56 | -25 +60 | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 174 | 750 | 3144 | 49 | IP X4 | 4.8 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | IP44 | 150 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , wall mounting , Inline | - | 0.77 | -25 +60 | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | 80 | 1050 | 2400 | 50 | IP 24 | 4.0 | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 91 | 1150 | 2990 | 51 | IP 24 | 4.0 | - | - | - | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 145 | 2230 | 2300 | 53 | IP X4 | 6.2 | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 178 | 2280 | 2410 | 54 | IP X4 | 6.2 | - | - | - | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | 108 | - | - | - | - | - | - | - | - | 0.49 | 2580 | 50 | - | 2 | - | - | - | - | IP X4 | 230 | - | - | 7 | 1 | - | 50 | - | - | - | - | - | C | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 880 | - | - |
60 Hz | 118 | - | - | - | - | - | - | - | - | 0.54 | 2840 | 51 | - | 2 | - | - | - | - | IP X4 | 230 | - | - | 7 | 1 | - | 60 | - | - | - | - | - | - | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 883 | - | - |
Speed 1 | - | - | 230 | 20 | - | 1400 | 33 | IP X4 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 100 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | 0.32 | 50 | - | - | - | - | - | - | 1 | - | - | 112 | no | - | - | - | - | - | 97 | - | - |
Speed 2 | - | - | 230 | 26 | - | 1800 | 36 | IP X4 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 100 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | 0.34 | 50 | - | - | - | - | - | - | 1 | - | - | 112 | no | - | - | - | - | - | 138 | - | - |
Speed 3 | - | - | 230 | 45 | - | 2600 | 44 | IP X4 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 100 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | 0.4 | 50 | - | - | - | - | - | - | 1 | - | - | 112 | no | - | - | - | - | - | 176 | - | - |
- | - | - | 400 | 303 | - | 910 | 51 | IP X4 | 33 | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | 0.8 | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | -20 … +60 | 1620 | - | - |
- | - | - | 3~380-480 | 2050 | 11100 | 1600 | 71 | IP X4 | - | - | - | - | 3 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | yes | - | - | polymer coated steel | - | - | for round air ducts | mixed-flow | - | Inline | - | 3.3 | -25 +40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 61 | 330 | 2560 | 35 | IP X4 | 13 | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 125 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | 0.28 | -25...+55 | - | - | - | no | - | - | - | yes | no | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 700 | 15550 | 710 | 66 | IP 24 | 42 | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 1.78 | - | - | - | - | 58 | IP X4 | - | - | - | - | - | - | - | - | - | 590 | - | 400 | 3740 | 1490 | - | 3 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 252 | 1590 | - | - | IP X4 | 15.7 | - | 2500 | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | 1.85 | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | -25 +50 | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | - | - | 3520 | - | - | 7 | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | 0.77 | IPX4 | B | 102 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | -20 … +60 | 670 | IP55 | - |
- | 613 | - | - | - | - | - | - | - | - | 2.70 | 930 | 58 | - | 6 | - | - | - | - | IP X4 | 230 | - | - | 76.4 | 1 | - | 50 | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 9560 | - | - |
- | - | 1.7 | 400 | - | 4550 | - | 53 | IP X4 | 58.1 | - | 1400 | - | 3 | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 550 | - | - | IP55 | 400 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | exhaust | flush mounting | 1264 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | -25...+120 | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Where have you learned about us?