Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | Max. air capacity | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | High-powered motor | Number of poles | Impeller diameter | Impeller width | Frequency | Speed | Current | Power | IP Code | Modification | Voltage | Maximum air capacity | RPM | Weight | Phase | Type | Pressure | Frequency | Fan power | Sound pressure level at 3 m | Current | Maximum transported air temperature | Power consumption | Engine Type | Voltage | Current | Frequency | Protection rating | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Current | Max. transported air temperature | Current | Maximum transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | High-power version | Sound- and heat-insulated casing | External rotor | High powered external rotor motor | Two-speed with external rotor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | Turbine protection rating | * |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | - | - | 1~230 | 125 | - | 1110 | 1955 | 47 | - | IP X4 | 7.8 | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | - | plastic | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 0.54 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
max | - | - | 1~230 | 177 | - | 1400 | 2440 | 55 | - | IP X4 | 7.8 | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | plastic | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 0.79 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 230 | 295 | - | - | 1350 | 66 | 20 +40 | IP X4 | 17.5 | - | - | - | - | - | - | 400х200 | 1 | - | 4 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 318.8 | - | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | 400 | 200 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 1~ 220-240 | 144 | - | 1000 | 2824 | 50 | - | IP X4 | 5.8 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | IP44 | 200 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | 0.63 | -25 +50 | - | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 193 | - | 1045 | 3164 | 50 | - | IP X4 | 5.8 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | IP44 | 200 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | 0.85 | -25 +50 | - | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | 140 | - | - | 1380 | 46 | - | IP 24 | 7.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2500 | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 147 | - | - | 1700 | 47 | - | IP 24 | 7.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2650 | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 110 | - | 1700 | 1300 | 42 | - | IP 24 | 5.1 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 104 | - | 1650 | 1365 | 41 | - | IP 24 | 5.1 | - | - | - | - | - | - | - | 1 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.7 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 1070 | 1300 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | IP 24 | - | 230 | - | - | 7.2 | 1 | - | - | - | - | - | - | 40 | 68 | - | - | 0.48 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 1050 | 1450 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | IP 24 | - | 230 | - | - | 7.2 | 1 | - | - | - | - | - | - | 40 | 76 | - | - | 0.51 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 44 | - | 470 | 1110 | 39 | - | IP X2 | 9.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | FFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | 0.19 | 150 | - | - | - | - | - | - | yes | yes | no | no | - | - | - | - | - | - | - |
- | - | - | 230 | 190 | - | 1190 | - | 61 | 25 +45 | IP X4 | 6.1 | - | - | - | - | - | - | 200 | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 687.5 | - | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 220-240 | 99 | - | 567 | 2770 | 45 | - | IP X4 | 5.0 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 160 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.44 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 220-240 | 137 | - | 575 | 3160 | 47 | - | IP X4 | 5.0 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.61 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 120 | 293 | - | 1249 | - | 62 | - | - | - | - | - | - | - | - | - | 250 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 761.4 | - | - | - | - | - | - | 120В / 60Гц | - | - | - | - | - | - | - | - | 250 | no | - | - | plastic | - | no | for round air ducts | centrifugal | , | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 380-480 | - | - | - | - | 63 | - | - | 46 | - | - | 1560 | - | - | - | - | 3 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.27 | - | - | - | - | - | - | IPX4 | - | 1323 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20 … +60 | 8110 | IP54 | - |
min | - | - | - | - | - | 405 | - | - | - | IP X4 | - | - | - | 1970 | - | - | - | - | 1 | - | - | - | - | - | min | - | - | - | - | - | - | - | 6.1 | - | - | - | - | 45 | 26 | - | - | - | - | 230 | - | 50/60 | - | - | - | C | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | 0.20 | 60 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
max | - | - | - | - | - | 555 | - | - | - | IP X4 | - | - | - | 2645 | - | - | - | - | 1 | - | - | - | - | - | max | - | - | - | - | - | - | - | 6.1 | - | - | - | - | 52 | 33 | - | - | - | - | 230 | - | 50/60 | - | - | - | C | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | 0.23 | 60 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 400 | 743 | - | - | 940 | 46 | - | IP X4 | 72 | - | - | - | - | - | - | - | 3 | - | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 1.47 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | -20 … +70 | 3310 | - | - |
- | - | - | 230 | 163.7 | - | - | 2510 | 40 | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | 1.34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 250 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | -25 +60 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | 1145 | - | - |
min | - | - | 230 | 106 | - | 390 | 700 | 22 | - | IP X4 | 20.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 200 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | yes | no | 98 | - | - | - | - |
max | - | - | 230 | 123 | - | 630 | 1200 | 38 | - | IP X4 | 20.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 200 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | 0.59 | - | - | - | - | - | - | - | - | - | - | - | yes | no | 97 | - | - | - | - |
- | - | - | 230 | - | - | 1970 | 2826 | - | - | IP X4 | 19.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 284 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | 1.25 | - | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | - | - | 4695 | 3125 | 53 | - | IP 54 | 61 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1531 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7.35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | - | - | 5345 | 3384 | 55 | - | IP 54 | 61 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2816 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11.92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 2.32 | - | - | - | - | - | 47 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 531 | - | - | 200-277 | 3053 | 2360 | 47 | 1 | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 101.6 | - | - | 2580 | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | 0.83 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 200 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | -25 +60 | - | - | 37 | - | - | - | yes | - | - | - | - | - | - | - | 700 | - | - |
- | 324 | - | - | - | - | - | - | - | - | - | - | 1.42 | - | 2620 | 58 | - | - | - | - | - | 2 | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 13 | 1 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2150 | - | - |
- | - | - | 230 | 704 | - | - | 2206 | 67 | - | IP X4 | 18.7 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | 3.13 | -25 +60 | - | - | - | no | - | no | - | - | - | - | - | - | - | - | 4790 | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 1~ 220-240 | 127 | - | 710 | 2760 | 48 | - | IP X4 | 4.8 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | IP44 | 150 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , wall mounting , Inline | - | - | 0.56 | -25 +60 | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 174 | - | 750 | 3144 | 49 | - | IP X4 | 4.8 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | IP44 | 150 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , wall mounting , Inline | - | - | 0.77 | -25 +60 | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 400 | 1560 | - | - | 1310 | 50 | - | IP X4 | 56 | - | - | - | - | - | - | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 2.73 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | -25 … +65 | 3740 | - | - |
- | - | - | 400 | 4250 | - | - | - | 69 | - | IP X4 | 100 | - | - | 1300 | - | 16870 | 14930 | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 630 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 7.55 | -40 +60 | - | - | - | - | yes | - | yes | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | - | - | - | - | 78 | IP 54 | 32.2 | - | - | - | - | - | - | - | - | - | 4 | 250 | 127 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 380В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Where have you learned about us?