 |
APPLICATION |
- Fire damper prevents smoke and fire propagation through the air ducts of ventilation and air conditioning systems in case of fire.
- Mounted in the ventilation ducts laid through fireproof walls and ceilings.
- Fire resistance rating is EIS 120.
|
| DESIGN |
- Consists of a galvanized steel casing (1), blades from insulation material (calcium silicate) and fireproof material (2), thermic release mechanism (3) activated at 70°С, silicone seal (4) and spring (5).
- The fire damper is open while operation.
- In case of fire the thermoelement melts at 70°С and the spring moves the blade to closed position.
|
| DIMENSIONS |
- Dn = 100, 125, 150, 160, 180, 200 mm.
|
| MOUNTING |
- Install the fire damper in such a way so that the release mechanism and inspection hole are on the side of the wall or ceiling for easy inspection of the thermic release mechanism and its internal part.
- Building the damper into brick and concrete walls or gypsum plates with the relevant fire resistance rating is allowed.
- To preserve the casing shape during mounting use wooden supports to prevent possible casing deformation and remove them after the final mounting.
- Warning!!! Do not install the fire dampers in high-explosive environment or in ventilation systems designed for exhaust of explosive air-gas mixtures.
|
| |
| |
| |
| |
| |
DESIGN AND DIMENSIONS |
| |
 |
| |
RECOMMENDED POSITIONS OF FIRE DAMPER |
| |
 |
| |
WOODEN SUPPORTS DURING MOUNTING |
| |
 |
| |
DOWNLOADS |
| |
|
Domestic fans
Industrial and commercial fans
Single-room ventilation systems with heat recovery
Air handling units
Air heating systems
Smoke extraction and ventilation
Accessories for ventilating systems
Electrical accessories
Ventilation ducts and fittings
Air distribution components
Ventilation kits and vents
x