Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | Fan current | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | Low-noise design | Number of poles | Impeller diameter | Impeller width | Frequency | Current | Power | RPM | Air capacity | IP Code | Modification | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Sound pressure level at 3 m | Current | Sound pressure level at 3 m | Engine Type | Protection rating | SEC Class | Power | SEC Class | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Maximum transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | High-power version | SEC class* | Backdraft damper | Number of intake spigots | Sound- and heat-insulated casing | External rotor | High powered external rotor motor | Two-speed with external rotor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Exhaust flange diameter | Intake flange diameter | Transported air temperature | Air capacity | Turbine protection rating | * | Spigot diameter | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | 0.96 | - | 121 | - | 1210 | - | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | 1210 | - | - | 230 | - | 3100 | 8.2 | - | - | 50/60 | - | - | 47 | - | - | - | - | - | - | IP44 | 200 | yes | - | - | galvanized steel | no | yes | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 336 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - | - |
- | 164 | - | - | - | - | - | - | - | - | - | - | - | 1.25 | 3310 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 8 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | aluminium | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 1500 | IP55 | - | - |
50 Hz | - | - | 400 | 180 | - | - | 1380 | 54 | - | IP 24 | 8.8 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3740 | - | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 195 | - | - | 1625 | 54 | - | IP 24 | 8.8 | - | - | - | - | - | - | - | 3 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3870 | - | - | - | 0.55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 36 | - | 200 | 1300 | 33 | - | IP 24 | 2.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.26 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 26 | - | 205 | 1590 | 33 | - | IP 24 | 2.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.26 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 55 | - | 860 | 2300 | 50 | - | IP 24 | 5 | - | - | - | - | - | - | - | 1 | - | 2 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | - | 0.26 | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 61 | - | 875 | 2550 | 51 | - | IP 24 | 5 | - | - | - | - | - | - | - | 1 | - | 2 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | - | 0.28 | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 108 | - | 400 | 1300 | 42 | - | IP X2 | 8.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | KFK+GFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.81 | 150 | - | - | - | - | - | - | - | - | - | yes | no | no | no | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 98 | - | 592 | - | 60 | - | IP X4 | 4.5 | - | - | - | - | - | - | 250 , 800х500 | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 356.3 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | 250 | no | - | - | plastic | - | no | for round air ducts | centrifugal | , | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 34 | 157 | 1410 | 52 | 40 | IP 24 | 2.5 | - | - | - | - | - | - | 150 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 31.3 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 230 | 427 | - | 2610 | 955 | 42 | - | IP X4 | 31 | - | - | - | - | - | - | - | 1 | - | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.13 | -20 +50 | - | - | - | - | no | - | - | - | 2 | yes | - | - | - | - | - | - | - | 315 | 250 | - | - | - | - | - |
- | - | - | 230 | 55 | - | 860 | - | 50 | IP X4 | 3.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | - | 230 | 75 | - | 435 | - | 36 | - | IP X4 | 6.4 | - | - | 2690 | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.33 | -25...+55 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 76 | - | 435 | - | 37 | - | IP X4 | 6.4 | - | - | 2720 | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.33 | -25...+55 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | - | - | - | - | 70 | IP 54 | 77.8 | - | - | - | - | - | - | - | - | - | 8 | 450 | 140 , 203 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 380В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 230 | 244 | - | - | 910 | 37 | - | IP X4 | 40.5 | - | - | - | - | - | - | - | 1 | - | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 250 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 1.22 | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | -20 … +50 | 1460 | - | - | - |
- | - | - | 1~230 | 84 | - | 885 | 2700 | 47 | - | IP X4 | 3 | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 200 | yes | - | - | plastic | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | 0.64 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
50 Hz | - | - | 230 | 53 | - | 180 | 1300 | 23 | - | IP X4 | 16.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | - | - | - | - | 100 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | no | no | 97.1 | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 55 | - | 215 | 1480 | 24 | - | IP X4 | 16.5 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | - | - | - | - | 100 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | no | no | 97.1 | - | - | - | - | - | - | - | - |
- | - | - | 230 | 183 | - | 1820 | 2780 | 49 | - | IP X4 | 9.4 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | - | 1.44 | -25 +60 | - | - | - | yes | - | no | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
- | - | - | 400 | 1150 | - | 15440 | 830 | 63 | - | IP X4 | 30 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | - | 58 | - | IP X4 | - | - | 0.86 | - | - | - | - | - | - | - | - | - | - | - | - | 102 | - | - | - | - | 230 | 755 | 2800 | 5.3 | 1 | - | 50 | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 2925 | - | 8535 | - | - | - | IP X4 | 54.3 | - | - | 2400 | - | - | - | - | 3 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.05 | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | -25 +50 | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 0.59 | - | - | - | - | - | - | - | IP 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 | - | 779 | - | - | 230 | - | 2070 | 24 | 1 | - | 50/60 | - | - | - | - | - | - | - | B | - | - | 160 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - | - |
- | - | - | 1~ 220-240 | - | - | 1250 | - | 50 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | 3110 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 121 | - | - | IP44 | 200 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 347 | 0.96 | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 5.1 | 400 | - | - | 16400 | - | 57 | - | IP X4 | 210 | - | - | 970 | - | - | - | - | 3 | - | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2200 | - | - | IP55 | 710 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | exhaust | flush mounting | - | - | 4556 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | -25...+120 | - | - | - | - |
- | - | - | 230 | 98 | - | 555 | 2705 | 47 | - | IP X4 | 4.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 150 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | exhaust , supply | outdoor mounting , wall mounting , Inline | - | - | - | 0.43 | -25...+55 | - | - | - | no | no | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 1430 | - | - | - | 58 | - | IP X4 | 56 | - | - | 1375 | - | 7940 | 7200 | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 3.00 | -40 +80 | - | - | - | - | no | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | - | - | - | - | 75 | IP 54 | 24.2 | - | - | - | - | - | - | - | - | - | 2 | 225 | 103 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 380В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 230 | 50 | - | - | 1380 | 55 | IP X4 | 4.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | - | 400 | 800 | - | 12200 | 1320 | 69 | - | IP 24 | 20.0 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 910 | - | 12400 | 1585 | 69 | - | IP 24 | 20.0 | - | - | - | - | - | - | - | 3 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 1~230 | 284 | - | 1970 | 2826 | 55 | - | IP X4 | 11.95 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | yes | - | - | low-combustible polypropylene | - | - | for round air ducts | mixed-flow | - | Inline | - | - | - | 1.25 | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
50 Hz | - | - | 400 | 148 | - | 3500 | 900 | 53 | - | IP 24 | 10.0 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 175 | - | 3580 | 1050 | 53 | - | IP 24 | 10.0 | - | - | - | - | - | - | - | 3 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 96 | - | 640 | 2515 | 62 | - | IP X4 | 4.62 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 200 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | - | 0.42 | 55 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 97 | - | 650 | 2555 | 62 | - | IP X4 | 4.62 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 200 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | - | 0.42 | 55 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Min. speed | - | 0.37 | - | - | - | - | - | 42 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 83 | - | - | - | - | 230 | 430 | 1920 | 3.0 | 1 | - | 50 | - | - | - | - | - | - | - | C | - | - | 200 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Max. speed | - | 0.43 | - | - | - | - | - | 42 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 95 | - | - | - | - | 230 | 741 | 2470 | 3.0 | 1 | - | 50 | - | - | - | - | - | - | - | C | - | - | 200 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | - | - | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1308 | - | 4290 | - | - | 380-480 | - | 3160 | - | 3 | - | 50/60 | - | 2.35 | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - | - |
- | 324 | - | - | - | - | - | - | - | - | - | - | 1.42 | - | 2620 | 58 | - | - | - | - | - | 2 | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 13.2 | 1 | - | 50 | - | - | - | - | - | - | - | - | - | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2150 | - | - | - |
- | - | - | 230 | - | - | 600 | 3506 | - | - | IP X4 | 5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | 0.49 | - | - | - | - | 55 | - | - | IP44 | - | yes | - | - | plastic | no | - | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 167 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - | 150/160 |
50 Hz | - | - | 1~ 220-240 | 42 | - | 230 | 2732 | 35 | - | IP X4 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | IP44 | 100 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.19 | -25...+55 | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
60 Hz | - | - | 1~ 220-240 | 51 | - | 250 | 3258 | 36 | - | IP X4 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | IP44 | 100 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.23 | -25 +50 | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
50 Hz | - | - | 230 | 700 | - | - | - | 52 | - | IP X4 | 39 | - | - | 1370 | - | 3750 | 3535 | - | 1 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.4 | -40 +80 | - | - | - | - | no | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 700 | - | - | - | 52 | - | IP X4 | 39 | - | - | 1460 | - | 4310 | 4015 | - | 1 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 3.15 | -40 +55 | - | - | - | - | no | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 5850 | - | - | 1140 | 67 | - | IP X4 | 74 | - | - | - | - | - | - | - | 3 | - | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 800 | 500 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 9.35 | - | - | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | - | - | -25 ... +40 | 8120 | - | - | - |
50 Hz | - | 0.38 | - | - | - | - | - | 36 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 61 | - | - | - | - | 230 | 260 | 2610 | 2.2 | 1 | - | 50 | - | - | - | - | - | - | - | C | - | - | 125 | no | 270 | 250 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
60 Гц | - | 0.4 | - | - | - | - | - | 37 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 64 | - | - | - | - | 230 | 270 | 2680 | 2.2 | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | 125 | no | 270 | 250 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). | - |
50 Hz | - | - | 400 | 80 | - | 1060 | 2600 | 51 | - | IP 24 | 3.8 | - | - | - | - | - | - | - | 3 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 92 | - | 1150 | 3030 | 52 | - | IP 24 | 3.8 | - | - | - | - | - | - | - | 3 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | 123 | - | - | - | - | - | - | - | - | - | - | 0.54 | - | 2790 | 51 | - | - | - | - | - | 2 | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 7 | 1 | - | 50 | - | - | - | - | - | - | - | - | C | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 915 | - | - | - |
60 Hz | 169 | - | - | - | - | - | - | - | - | - | - | 0.70 | - | 2820 | 52 | - | - | - | - | - | 2 | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 7 | 1 | - | 60 | - | - | - | - | - | - | - | - | - | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 1 010 | - | - | - |
- | - | - | 230 | 116 | - | 540 | 1270 | 42 | - | IP X2 | 6.9 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.86 | 150 | - | - | - | - | - | - | - | - | - | yes | no | no | no | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 41 | - | 420 | 1250 | 38 | - | IP X2 | 10.8 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | KFK+GFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 140 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.18 | 150 | - | - | - | - | - | - | - | - | - | yes | yes | no | no | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | - | - | 520 | - | 64 | 55 | IP X4 | 4.5 | - | - | - | - | - | - | 150 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 456.3 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 185 | 984 | - | 62 | 25 +50 | IP X4 | 8.1 | - | - | - | - | - | - | 200 | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 656.3 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 200-277 | - | - | - | - | 51 | - | - | 23 | - | - | 1550 | - | - | - | - | 1 | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.36 | - | - | IPX4 | - | 669 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 3830 | IP54 | - | - |
- | - | - | 230 | 116 | - | 645 | - | 44 | - | IP X4 | 11.05 | - | - | 2625 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.52 | -25...+55 | - | - | - | no | yes | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 380 , 400 | 250 | - | 450 | 1350 | 60 | IP 54 | 9.3 | - | - | - | - | - | - | - | - | - | 4 | 140 | 74 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 380В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | - | 230 | 250 | - | 4680 | 1350 | - | - | IP 24 | 10.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 | - | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 325 | - | 4790 | 1600 | - | - | IP 24 | 10.5 | - | - | - | - | - | - | - | 1 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 | - | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 1~ 220-240 | 58 | - | 340 | 2500 | 48 | - | IP X4 | 2.84 | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 100 , 125 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | - | - | 0.26 | -25 +50 | - | - | - | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 1~ 220-240 | 81 | - | 355 | 2750 | 49 | - | IP X4 | 2,84 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 100 , 125 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | - | - | 0.36 | -25 +50 | - | - | - | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 101.6 | - | - | 2580 | 37 | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | 50/60 | 0.83 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 200 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | - | -25 +60 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | 700 | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Please evaluate our updated site user friendliness