VENTS 100 CF turbo VT (120/60)

• Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
• Ventilation shaft mounting or duct connection.

• Designed for high-resistance ventilation duct systems.
• Compatible with 100 mm air ducts.

• Modern design and aesthetic look.
• The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
• The easy to use removable grille with a filter element protects the fan internal components against grease and dust penetration and makes it suitable for kitchen exhaust ventilation.
• The basic CF fan modification includes a dust filter. Aluminium grease filter configurations are also available (CFA model).

• The centrifugal fan impeller has forward curved blades for high pressure and low noise levels.
• Protection rating IP 24.

• Reliable and low-watt single-phase electric motor.
• The basic motor modification includes plain bearings.
• The „turbo“ modification includes the motor equipped with ball bearings mounted on specially designed vibration dampers.

• Designed for continuous operation and requires no maintenance.
• Equipped with overheating protection.

Manual:

• The fan is controlled by a room light switch. It is not included in the delivery package.
• The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
• Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same regulator unit. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.

Automatic:

• By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.

• Suitable for external or built-in mounting.
• Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
• Fixed to the wall by self-tapping screws or fixing brackets.

• Suitable for ceiling mounting.
• For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.