Vents 150 Z star

Print version Save in PDF format

Maximum capacity - 258 m³/h.

Add to project

Add to compare

Description
Characteristics
Capacity diagram
Downloads
Options
Dimensions
Wiring plan

Description

APPLICATIONS
Continuous or periodic air extraction of bathroom, showers, kitchens and other utility spaces. Ventilation shaft mounting or duct connection.				Delivery of low and medium intensity air flow to small distances over a low-resistance ventilation system. Compatible with 100, 125 and 150 mm ducting.
DESIGN
The polished steel front panel with various ornamental modifications. Modern design and aesthetic look. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.				The intellectual impeller design makes the fan efficiency high and the service life long. Protection rating IP 24.
		A 2 W LED lamp is integrated into the fan casing.
MOTOR
Reliable and energy-efficient electric motor. Intended for continuous operation and maintenance-free.				Equipped with integral overheating protection.
FRONT PANEL MODIFICATIONS

	Z star 1	Z star 2	Z star 3	Z star 4	Z star 5	Z star 6
CONTROL
Manual: The fan is controlled by a room light switch. It is not included in the delivery package. Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.				Automatic: By means of electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately. By means of timer T (the built-in shutdown delay timer enables fan operation for additional 2 to 30 minutes after switching off). By means of the humidity sensor and timer TH (if the room humidity exceeds the sensor threshold adjustable within 60-90% the fan will switch on automatically and operate until the humidity level reverts to normal; the fan will run as pre-programmed and shut down).
MOUNTING
The fan is mounted directly into the ventilation shaft opening. If the ventilation shaft remoteness prevents direct installation flexible ducts may be used. The ducts are coupled with the fan outlet flange by means of a clamp.				Fixed to the wall on self-tapping screws. For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
MOUNTING EXAMPLE

Characteristics

Parameter	Value	Measurement unit
Voltage	220-240	V
Frequency	50; 60	Hz
Power consumption	24	W
Air capacity	258	m³/h
Current	0.13	A
RPM	2400	min^-1
Sound pressure level at 3 m	37	dBА
Weight	0.94	kg
Spigot size	150	mm
Engine Type	220-240V / 50Hz or 220-240V / 60Hz	-
Design	axial	-
Duct diameter	150	mm
IP Code	IP 24	-
Type	exhaust	-
Mounting	wall mounting , ceiling mounting	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Modifications

Modification name	Light
Vents 150 Z star		+

Dimensions

Characteristics

Parameter	Value	Measurement unit
Ø D	150	mm
B	231	mm
H	165	mm
L	171	mm
L1	56	mm

Wiring plan

Wiring diagram for the fans equipped with a built-in switch	Wiring diagram for the fans without built-in switch

Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch	Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch

Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.

Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.

Wiring diagram for the fans with grounding

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment

The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.

Legend

Picture symbol		Designation		Modification description
		Z star К		Fan is equipped with a backdraft damper for back flow preventing.
		Z star L		The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
		Z star turbo		High-powered motor.
		Z star 12		Modification with low-voltage motor. 12 V AC power supply.
		Z star T*		Equipped with a regulated timer with the operating time from 2 to 30 minutes. Only for 100 mm fans.
		Z star TH*		Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%. Only for 100 mm fans .