Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS Quiet 150 T

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Options
  • Dimensions
Description
Description
APPLICATIONS  
  • Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises.
  • Maximum air capacity combined with low noise level provide the ideal microclimate.
  • Mounting into ventilation shafts or connection to Ø100, 125, 150 mm.
DESIGN  
  • Casing and impeller made of high-quality and durable UV-resistant plastic.
  • Specially designed impeller aerodynamic profile provides high air capacity and low noise.
  • The compact design enables wall and ceiling mounting.
  • The shortened spigot for mounting into a ventilation shaft or connection to Ø 100, 125, 150 mm air ducts.
  • The fan is equipped with a specially designed back valve to prevent back flow and heat losses during the fan standby.
  • The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
  • High ingress protection rating ensures makes the fan the ideal solution for ventilation of a bathroom. The electronic components are protected with tight covers. Models VENTS 150 Quiet and VENTS 150 Quiet Extra are additionaly equipped with a special vibration absorbing sealer along the fan countour.
MOTOR  
  • Low energy demand from 7.5 W due to new high-efficient motor.
  • Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.
  • Motor on special anti-vibration dampers for vibration absorbing and silent operation.
  • Motor equipped with overheating protection.
  • VENTS 150 Quiet supplied with 2 speed motor. VENTS 150 Quiet Extra supplied with 2 speed high powered motor.
Operation modes of the VENTS 150 Quiet and VENTS 150 Quiet Extra
 Operation modes of the fans models VENTS 150 Quiet and VENTS 150 Quiet Extra with modifications TTHVTVTHTP is selected by setting the DIP switch into the required position. 
 Mode 1 (single-speed mode)
  • The fan is turned off by default. The fan starts operating at the 1st speed when the switch is closed or one of the sensors is activated.

Mode 2 (single-speed mode)

  • The fan is turned off by default. The fan starts operating at the 2nd speed when the switch is closed or the sensors are activated.

Mode 3 (two-speed mode)

  • The fan operates at the 1st speed by default. The fan switches to the 2nd speed when the switch is closed or the sensors are activated.
 Mode 4 (two-speed mode)
  • The fan is turned off by default. The fan starts operating at the 1st speed when the switch is closed and switches to the 2nd speed when the humidity sensor is activated.

Mode 5 (two-speed mode)

  • The fan is turned off by default. The fan starts operating at the 1st speed when the switch is closed or when the humidity sensor is activated. If during the operation at the 1st speed the second even takes place. i.e. the switch is closed or the humidity sensor is activated, the fan switches to the 2nd speed.
CONTROL  

Manual control:

  • Manual control with a room light switch. The switch is not included into delivery set.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller or through speed switch P2-1-300 (only for VENTS 150 Quiet models), see Electrical Accessories. Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.

Automatic control:

  • By the electronic control unit BU-1-60 ( see Electrical Accessories). The control unit is supplied separately.
  • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the set time period and shuts down).
  • By the motion sensor and timer TP (if motion is detected in the reach area, the fan is switched automatically and operates within the set time period from 2 to 30 min). Reach distance up to 4 m, the max. viewing angle 100°.

MOUNTING FEATURES

 
  • Installation directly inside a ventilation shaft.
  • Flexible air ducts may be used in case of remote location of the ventilation shaft.
  • Connection of the air duct to the exhaust flange with a clamp.
  • Wall mounting with screws.
  • Suitable for ceiling mounting.
MOUNTING EXAMPLE  
Characteristics
Characteristics
Parameter max min Measurement unit
Voltage 230 230 V
Frequency 50/60 50/60 Hz
Power consumption 19 17 W
Air capacity 315 220 m³/h
Current 0.09 0.08 A
Sound pressure level at 3 m 33 28 dBА
Weight 1.33 1.33 kg
Spigot size 150 150 mm
Engine Type 230V / 50-60Hz 230V / 50-60Hz -
Design axial axial -
Duct diameter 150 150 mm
IP Code IP 45 IP 45 -
Type exhaust exhaust -
Mounting wall mounting , ceiling mounting wall mounting , ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Modifications
Modifications
Modification name Backdraft damperTimer
VENTS Quiet 150 T
+
Dimensions
Characteristics
VENTS Quiet 150
Parameter Value Measurement unit
Ø D 147.5 mm
B 214 mm
H 190 mm
L 111 mm
L1 32 mm
Legend
Legend
PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
Quiet Extra High-powered motor.
Quiet T Off-delay timer modification with operating time from 2 to 30 min.
Quiet TH Off-delay timer modification with the operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
Quiet V Pull-cord switch modification.
Quiet VT Modification with pull-cord switch and off-delay timer with operating time from 2 to 30 min.
Quiet VТН Modification with pull-cord switch, off-delay timer with operating time  from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
Quiet ТР Modification with off-delay timer with operating time from 2 to 30 min and motion sensor; reach distance up to 4 m, viewing angle up to 100°.

Note:

Models VENTS 150 Quiet with modification T / TP / VT / VTH additionaly supplied with turn-on delay timer adjustable from 0 up to 2 minutes.

Video
Video

Share your opinion

Questionnaire
Please evaluate our updated site user friendliness