Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS Quiet-Style 100 T


Intellectual axial low-noise and energy saving fan for exhaust ventilation with air capacity up to 90 m3/h.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Options
  • Dimensions
Description
Description
APPLICATIONS
  • Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises.
  • Maximum air capacity combined with low noise level provide the ideal microclimate.
  • Mounting into ventilation shafts or connection to Ø 100 mm.
DESIGN
  • Casing, impeller and frontpanels made of high-quality and durable UV-resistant plastic.
  • Specially designed impeller aerodynamic profile provides high air capacity and low noise.
  • The compact design enables wall and ceiling mounting.
  • The shortened spigot for mounting into a ventilation shaft or connection to Ø 100 mm air ducts.
  • The fan is equipped with a specially designed back valve to prevent back flow and heat losses during the fan standby.
  • The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
  • High ingress protection rating ensures makes the fan the ideal solution for ventilation of a bathroom. The electronic components are protected with tight covers.
MOTOR
  • Low energy demand 7.5 W due to new highefficient motor.
  • Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.
  • Motor on special anti-vibration dampers for vibration absorbing and silent operation.
  • Motor equipped with overheating protection.
CONTROL

Manual control:

  • Manual control with a room light switch. The switch is not included into delivery set.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller, see Electrical Accessories. Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHVTVTH modification.

Automatic control:

  • By the electronic control unit BU-1-60. The control unit is supplied separately.
  • By the timer T ( the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH ( if the humidity level in the room exceeds the sensor threshold within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the set time period and shuts down).
MOUNTING FEATURES
  • Installation directly inside a ventilation shaft.
  • Flexible air ducts may be used in case of remote location of the ventilation shaft. Connection of the air duct to the exhaust flange with a clamp.
  • Wall mounting with screws.
  • Suitable for ceiling mounting.

 

Characteristics
Characteristics
Parameter Value Measurement unit
Voltage 230 V
Frequency 50; 60 Hz
Power consumption 7.5 W
Air capacity 90 m³/h
Current 0.05 A
Sound pressure level at 3 m 26 dBА
Weight 0.66 kg
Spigot size 100 mm
Engine Type 220-240V / 50Hz or 220-240V / 60Hz -
Design axial -
Duct diameter 100 mm
IP Code IP 45 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Modifications
Modifications
Modification name Timer
VENTS Quiet-Style 100 T
+
Dimensions
Characteristics
VENTS Quiet-Style 100
Parameter Value Measurement unit
Ø D 99 mm
B 200 mm
L 130 mm
L1 49 mm
Legend
Legend
PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
Quiet-Style T Off-delay timer modification with operating time from 2 to
30 min.
Quiet-Style TH Off-delay timer modification with the operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
Quiet-Style V Pull-cord switch modification.
Quiet-Style VT Modification with pull-cord switch and off-delay timer with operating time from 2 to 30 min.
Quiet-Style VTH Modification with pull-cord switch, off-delay timer with operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
Video
Video

Share your opinion

Questionnaire
How often do you use equipment selection program?