Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS AVU 03/SE/R/O

  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Additional diagrams
  • Legend
Description
Description
DESCRIPTION CASING
  • The AVU 03 air handling unit is a fully-featured ventilation unit that ensures air filtration, fresh air supply and stale air extract.
  • Extract air heat energy is recovered by a rotary regenerator.
  • The unit is applied as component of ventilation and air conditioning networks for various premises requiring cost-efficient controllable ventilation.
  • Integrated EC motors provide energy demand decrease by 1.5 to 3 times and ensure low noise level.
  • The AVU air handling unit series is expected to be supplemented with AVU 05, AVU 07, AVU 09, AVU 11 and AVU 14 models with air capacity up to 14 000 m3/h.
  • The casing is made of sandwich panels, 25 mm thick for inner modifications and 50 mm thick for outer modifications.
  • The aluzink panels are filled with mineral wool between for reliable sound- and heat insulation.
  • Specially designed swivel side panels of the unit ensure easy access to the unit components and enable the unit mounting in limited service space conditions.
  • The supply and exhaust air ducts are fitted with electrically actuated air dampers.
  • The outer models are equipped with protecting hoods for fresh air intake and stale air exhaust.
MODIFICATIONS FILTERS
  • AVU 03/SE/R – inner modification model.
  • AVU 03/SE/R/H – inner modification model, water heater.
  • AVU 03/SE/R/О – outer modification model.
  • AVU 03/SE/R/ОH – outer modification model, water heater.
  • The unit has two filters, a G4 panel filter and a F7 bag filter.
  • Extract air is purified with a G4 panel filter.
ROTARY REGENERATOR
MOTOR
  • High-efficient electronically-commutated direct current motors with external motor and impeller with backward curved blades.
  • Such motors are the most state-of-the-art energy-saving solution.
  • EC motors are featured with high performance and total speed controllable range.
  • High efficiency reaching 90% is the premium advantage of the electronicallycommutated motors.
  • High-efficient electronically-commutated direct current motors with external motor and impeller with backward curved blades.
  • Such motors are the most state-of-the-art energy-saving solution.
  • EC motors are featured with high performance and total speed controllable range.
  • High efficiency reaching 90% is the premium advantage of the electronicallycommutated motors.
Rotary regenerator operating logic
HEATER CONTROL AND AUTOMATION
  • The unit AVU 03/...H is equipped with a water heater for the unit operating conditions at low outside temperatures.
  • If set supply air temperature is not be attained with heat recovery only, the heater is turned on to warm up air flow supplied to the room.
  • The water heater is compatible with the systems with maximum operating pressure 1.0 Mpa (10 bar) and maximum heat medium temperature + 95 °С.
  • The unit is equipped with integrated automation.
AUTOMATION FUNCTIONS:
  • turning the unit on/off according to set control logic;
  • setting supply air temperature and air flow from the remote control panel;
  • actuating air dampers;
  • filter control with a differential pressure switch;
  • supply and control and regulation by actuating the heat medium regulating three-way valve;
  • circulation pump control and regulation;
  • water heater freezing protection by the temperature sensor downstream of the water heater and the return medium thermostat.
COOLER  
  • The unit has connection possibilities for a water cooling block (C3 / AVU 03, special accessory) or DX cooling block (DX3 / AVU 03, special accessory).
  • These blocks are available in outer and inner modifications with a panel width 50 or 25 mm respectively.
MOUNTING
 
  • The unit is designed for mounting on a horizontal surface. Access for servicing through side panels.
 
Characteristics
Characteristics
Parameter AVU 03/SE/R/O
Measurement unit
Frequency 50 Hz
Engine Type 380В / 50Гц -
Phase 3 ˜
Maximum unit power 2520 W
Unit voltage Unit voltage 400 V
Maximum air capacity 3000 m³/h
Maximum unit current 4 A
Casing material aluzinc -
Maximum transported air temperature Maximum transported air temperature -25 +60 °С
Insulation 50 mm, mineral wool -
Filter: extract кассетный G4 -
Filter: supply кассетный G4 и карманный F7 -
Connected air duct size 600х350 mm
Heat recovery efficiency Heat recovery efficiency 65 %
Heat exchanger material алюминий -
Heat recovery Heat recovery 1 -
Water cooler block (not included delivery) Water cooler block (not included delivery) C3/AVU 03/О -
DX cooler block (not included delivery) DX cooler block (not included delivery) DX3/AVU 03/О -
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS AVU" product description 05-2013 (pdf 272.53Kb)
Download image "VENTS AVU" for your website (png 486.71Kb)
Download high quality image "VENTS AVU" (psd 1.71Mb)
"Germicidal chamber UV" installation and operation manual 10-2023 (V148-2EN-01) (pdf 928.3Kb)
"Gas Heater Section HG" installation and operation manual 09-2023 (V148-3EN-01) (pdf 1.07Mb)
Dimensions
Characteristics
Parameter Value Measurement unit
Length 2200 mm
Width 970 mm
Height 970 mm
Additional diagrams
Additional diagrams

Water heater parameters:


Water heater parameters calculation example:
Air Speed. Starting from 3500 m3/h on the air flow scale draw a vertical line 1 till the air speed axis which makes 4.65 m/s..

  • Supply air temperature. Prolong the line 1 of air flow up to the point where it crosses the outside air temperature (-10°C); then draw a horizontal line 2  from this point to the left till crossing water in/out temperature curve (90/70). From this point draw a vertical line 3 to the supply air temperature axis on top of the graphic (+22.5 °C).
  • Heating capacity. Prolong the line 1 up to the point where it crosses the outside air temperature (red line, -10°C) and draw a horizontal line  4 from this point to the right until it crosses water in/out temperature curve (90/70), from here draw a vertical line 5 up to the scale representing the heating coil capacity (42.0 kW).
  • Water flow. Prolong the line down to water flow axis at the bottom of the graphic 6 (0.5 l/s).
  • Water pressure drop. Draw the line 7 from the point where line 6 crosses the black curve to the pressure drop axis. (6.5 kPa).

 

Water cooler parameters:


Water cooler parameters calculation example:
Air Speed. Starting from 2850 m3/h on the air flow scale draw a vertical line 1 till the air speed axis which makes 3.85 m/s.

  • Supply air temperature. Prolong the line 1 of air flow up to the point where it crosses the outside summer air temperature (+32°C); then draw a horizontal line 2 from this point to the left till crossing intake air humidity curve (50%). From this point draw a vertical line 3 to the air temperature downstream of the cooler axis on top of the graphic (+20.7 °C).
  • Cooling capacity. Prolong the line 1 up to the point where it crosses the summer outside air temperature (+32°C) and draw a horizontal line 4 from this point to the right till crossing intake air humidity curve (50%), from here draw a vertical line 5 up to the scale representing the cooling coil capacity (19.8 kW).
  • Water flow. Prolong the perpendicular line down to water flow axis at the bottom of the graphic 6 (0.78 l/s).
  • Water pressure drop. Draw the line 7 rightwards from the point where the line 6 crosses the curve to the pressure drop axis. (30 kPa).

 

DX cooler parameters calculation example:


DX cooler parameters calculation example:
Air Speed. Starting from 3500 m3/h on the air flow scale draw a vertical line 1 till the air speed axis which makes 4.65 m/s.

  • Supply air temperature. Prolong the line 1 of air flow up to the point where it crosses the outside summer air temperature (+30°C); then draw a horizontal line 2 from this point to the left till crossing intake air humidity curve (50%). From this point draw a vertical line 3 to the air temperature downstream of the cooler axis on top of the graphic (+22.5 °C).
  • Cooling capacity. Prolong the line 1 up to the point where it crosses the summer outside air temperature (+30°C) and draw a horizontal line 4 from this point to the right till crossing intake air humidity curve (50%), from here draw a vertical line 5 up to the scale representing the cooling coil capacity (14.5 kW).
  • Coolant flow. Prolong the perpendicular line down to coolant flow axis at the bottom of the graphic 6 (310 kg/hr).
  • Coolant pressure drop. Draw the perpendicular line 7 rightwards from the point where the line 6 crosses the curve to the pressure drop axis. (24.0 kPa).

Legend
Legend
Series   Rated air capacity [m3/h]   Heat exchanger   Function block
VENTS AVU   03 - 3000 m3/h   SE/R - rotary regenerator, inner modification;
SE/R /О - rotary regenerator, outer
modification.
  H - water heater
Share your opinion

Questionnaire
Where have you learned about us?