Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS KSB 200 EC P


Centrifugal inline fan with capacity up to 700 m³/h in insulated casing.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
  • Video
Description
Description
PURPOSE
  • The design of the KSB fans allows to use them in supply and exhaust ventilation systems in premises with high requirements to the noise level, efficiency and fan control and with limited space for mounting.

  • For example, the unit design includes a possibility of space-restricted installation above suspended ceilings. 

  • The KSB EC fans are designed for mounting into Ø 100, 125, 150, 160, 200, 250, 315 mm air ducts.

DESIGN
  • The fan casing is made of galvanized sheet steel using heat- and sound-insulation material.

  • The round connecting spigots are rubber sealed.

MOTOR
  • The unit is equipped with high-efficient external rotor EC motors and centrifugal impellers with backward curved blades.

  • These motors currently are the most cutting-edge solution in the field of energy conservation.

  • The use of EC motors allows to reduce the electricity consumption by 35% approximately while providing the high capacity and low noise level.

  • The EC motors are featured with high performance and totally controllable speed range.

  • The high efficiency (up to 90%) is a definite advantage of the EC motors.

  • The motors are equipped with rolling-element bearings that provide a longer operation period (40000 hours).

SPEED CONTROL
  • The fans are controlled by means of a 0-10 V external control signal while the performance regulation is based on the feedback from the temperature, smoke and other sensors as well as other vital parameter settings.

  • As the control signal changes the EC fan changes speed accordingly to supply the exact air amount required by the ventilation system.

  • The maximum fan speed does not depend on the electric mains frequency enabling compatibility with both 50 Hz and 60 Hz networks.

  • The fans can be easily combined into a single computer-controlled network.

  • Special software allows for precise control over the operating parameters of the network units.

MOUNTING
  • The fans are intended for installation in round air ducts. They are installed between the air ducts. 

  • The use of flexible connectors requires fixation of the fan on the building structure by means of supports, mounts or fixing brackets.

  • The fan can be fixed in any position, taking into account the air flow direction indicated by the arrow on the fan casing.

  • While mounting the fan provide enough access for servicing and repair operations.

  • Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box.

Characteristics
Characteristics
Parameter VENTS KSB 200 EC P
Measurement unit
Current 0.83 A
Phase 1 ˜
Voltage 230 V
Frequency 50/60 Hz
Air capacity 700 m³/h
Power consumption 101.6 W
EC motor yes -
RPM 2580 min-1
Max. transported air temperature -25 +60 °С
Protection rating IP X4 -
Design centrifugal -
Duct diameter 200 mm
Sound pressure level at 3 m distance 37 dBА
Sound- and heat-insulated casing yes -
Casing material galvanized steel -
SEC Class B -
Duct for round air ducts -
Type supply and exhaust -
Mounting Inline -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Download high quality image "VENTS KSB EC (ErP 2018)" (psd 2.3Mb)
Download image "VENTS KSB EC (ErP 2018)" for your website (png 372.55Kb)
"VENTS KSB EC" product description 05-2022 (pdf 1.06Mb)
"VENTS KSB EC" user's manual 06-2023 (V143EN-02) (pdf 1.51Mb)
Dimensions
Characteristics
VENTS KSB 200 EC P
Parameter Value Measurement unit
∅D 199 mm
B 485 mm
B1 590 mm
B2 506 mm
H 295 mm
L 435 mm
L1 503 mm
L2 368 mm
Additional characteristics
Additional characteristics
Sound power level [dBA], A - weighted Octave frequency band [Hz] LpA, 3 m [dBA] LpA, 1 m [dBA]
Hz          Общ. 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBA 62 46 59 59 41 37 34 30 23 41  51 
LwA to outlet dBA 65 52 64 51 47 43 35 29 22 44   54
LwA to environment dBA 57 46 53 54 45 40 33 30 25 37 47
Designation key
Designation key
Series Air duct diameter Motor Options
VENTS KSB 100; 125; 150; 160; 200; 250; 315 ЕС: synchronous electronically commutated motor P: built-in smooth speed controller
Video
Video

Share your opinion

Questionnaire
Please evaluate our updated site user friendliness