Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS KSF 125 K2 EC


Centrifugal duct fan in a heat- and sound-insulated casing with air flow up to 393 m³/h.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
Description
Description
APPLICATION  
  • The KSF K2 EC fans are designed for supply and exhaust ventilation of premises with high requirements to the noise level and with limited space for mounting.
  • For example, the unit design includes a possibility of space-restricted installation above suspended ceilings.
  • Compatible with Ø 100-250 mm air ducts.
DESIGN  
  • The fan casing is made of aluzinc.
  • For easy installation and operation, the cover of the fan is secured with a special lock.
  • The casing is heat- and sound-insulated with a 50 mm layer of non-flammable mineral wool.
  • To ensure better noise absorption, the inner surface of the insulation is made of a perforated metal sheet.
  • The round connecting spigots are rubber sealed.
MOTOR  
  • The units feature efficient electronically commutated (EC) direct current motors with an external rotor and centrifugal impellers with forward curved blades.
  • EC motor is free of friction and wear parts such as a commutator and brushes.
  • These components are replaced by a maintenance-free electronic circuit board.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
INTEGRATED FUNCTIONS AND CONTROL  
  • The fan is controlled with an external control signal 0-10 V (capacity control is performed depending on temperature, pressure, smoke level etc.).
  • The fan has low energy consumption at any speed.
  • Maximum fan speed does not depend on the available current frequency and is suitable for operation both at 50 and 60 Hz.
  • The fans can be connected to centralized computer ventilation control systems.
INSTALLATION  
  • Duct fans are intended for mounting to round air ducts.
  • The fans are installed between the air ducts.
  • In case the fan is mounted on flexible joints, attach the fan to a structural unit by means of supports, suspension links or brackets.
  • The fan may be installed in any position in consideration of the air flow direction (as indicated by the arrow on the fan casing).
  • While mounting the fan provide enough access for servicing and repair operations.
Characteristics
Characteristics
Parameter KSF 125 K2 EC
Measurement unit
Frequency 50/60 Hz
Phase 1 ˜
Voltage 230 V
Power 118 W
Current 0.92 A
Air capacity 393 m³/h
EC motor yes -
RPM 3270 min-1
Protection rating IP 44 -
Design centrifugal -
Transported air temperature -25 ... +50 °С
Duct diameter 125 mm
Sound pressure level at 3 m distance 33 dBА
Casing material aluzinc -
Weight 17 kg
SEC Class C -
Outdoor mounting no -
Sound-insulated casing yes -
Duct for round air ducts -
Type supply and exhaust -
Mounting Inline -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS KSF K2 EC" product description 03-2021 (pdf 1003.73Kb)
Download image "VENTS KSF K2 EC (ErP 2018)" for your website (png 209.74Kb)
Download high quality image "VENTS KSF K2 EC (ErP 2018)" (psd 3.62Mb)
"VENTS KSF K2 EC" user's manual 08-2019 (V211EN-01) (pdf 1.72Mb)
Dimensions
Characteristics
VENTS KSF 125 K2 EC
Parameter Value Measurement unit
∅D 122 mm
B 512 mm
B1 360 mm
B2 589 mm
H 280 mm
L1 553 mm
L2 460 mm
Additional characteristics
Additional characteristics
Sound power level [A-filter] Sound pressure level at a distance of 3 m [A-filter] Sound pressure level at a distance of 1 m [A-filter]
Sound power level Gen. Octave frequency band [Hz]
  Hz 63 125 250 500 1000 2000 4000 8000 LpA, 3 m dBA LpA, 1 m dBA
LwA to inlet dBA 66 51 60 64 55 51 44 44 34 46 56
LwA to outlet dBA 85 70 80 82 77 63 54 57 48 65 75
LwA to environment dBA 59 44 49 55 55 46 45 44 43 39 49
Designation key
Designation key
Series Duct diameter Modification Motor Options
VENTS KSF 100, 125, 150, 160, 200, 250 К2: heat- and sound-insulated casing ЕС: synchronous electronically commutated motor R: power cord with the IEC C14 connector
Share your opinion

Questionnaire
Where have you learned about us?