VENTS MPA 800 E1

Description
Characteristics
Downloads
Dimensions
Additional characteristics
Designation key
Accessories

Description

DESCRIPTION	CASING
Air supply MPA unit is a complete ventilation unit for air filtration, air heating and supply to premises.	Steel casing covered with aluzinc coating internally filled with 25 mm heat- and sound-insulating layer made of mineral wool.
FILTER	HEATER
Integrated panel G4 filter ensures sufficient supply air purification.	Electric heater is used for heating of supply air in cold season.
FAN	CONTROL AND AUTOMATION
Centrifugal double-inlet fan with forward curved blades and built-in overheating protection with automatic restart. The ball bearings in the electric motor are maintenance free and designed for at least 40,000 hours operation.	Integrated control and automation system for threespeed (air flow) control and setting supply air temperature. The unit may be controlled from the external control panel fixed on 10 m wire delivered as a standard.
MPA...E CONTROL AND PROTECTION FUNCTIONS
Switching the unit on/off from the control panel. Setting the supply air temperature from the remote control panel and maintaining it by the triac heater control. Fan speed control from the control panel. Tracking the set operating control logic while turning the unit on and off. Unit operation according to daily and week schedule. Overheating protection of the electric heating elements. Disabling electric heater operation when the fans are not running.	Electric heater overheating protection by two overheating thermostats, one thermostat activated at 60 °C with automatic reset and another thermostat activated at 90 °C with automatic reset. Actuating the air damper. Input for alarm fire fighting signal. Input from external humidity sensor, CO₂ sensor, etc (normally opened dry contact). On sensor’s output signal the unit switches to the maximum speed.
MOUNTING
The supply unit can be mounted on the floor, suspended to the ceiling by means of a seat angle with a flexible connector or fixed to the wall using brackets. The unit can be installed either in such service spaces as balcony, storeroom, basement, roof space or in main premises above the suspended ceiling, in the pocket or placed directly in the room.	The unit can be mounted in any position but the vertical one with air downstream because the heating elements are not allowed under the fan. Access for the unit maintenance and filter cleaning shall be provided.

OFFICE VENTILATION EXAMPLE
Air supply and exhaust ventilation in the modern office can be arranged as follows. Air handing MPA unit, exhaust fan complying with MPA unit characteristics, intake and exhaust main air ducts are mounted in the hall behind the suspended ceiling.	The branchings are laid into the office premises and air distribution units. Intake air from outside flows through the external grille, is filtered in the air handling unit, heated to the required temperature and supplied to the office rooms through the branch duct system. Exhaust air is extracted outside through the external grille by means of the exhaust fan. Thus the office has the permanent fresh air supply, controllable air exchange, no draughts when opened windows, no dust and no noise.

MPA unit office air exchange example

Characteristics

Parameter	MPA 800 E1	Measurement unit
Frequency	50	Hz
Phase	1	˜
Voltage	230	V
Maximum fan power	245	W
Electric heater power	3300	W
Total unit power	3550	W
Fan current	1.08	A
Electric heater current	14.3	A
Total unit current	15.38	A
Air capacity	800	m³/h
RPM	1650	min^-1
Noise level at 3 m	35	dBА
Maximum transported air temperature	-25 ... +40	°С
Heating	electric heating	-
Casing material	aluzinc	-
Insulation	25 mm mineral wool	-
Filter	G4	-
Connected air duct size	400х200	mm
Weight	36.2	kg
Outdoor mounting	no	-
Duct	for rectangular air ducts	-
Type	supply	-
Mounting	floor mounting, wall mounting, ceiling mounting	-

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
B	400	mm
B1	420	mm
B2	549	mm
B3	500	mm
H	200	mm
H1	220	mm
H2	352	mm
L	650	mm
L1	530	mm
L2	–	mm

Additional characteristics

Sound-power level		Octave-frequency band [Hz]
	Hz	Gen	63	125	250	500	1000	2000	4000	8000
L_wA to inlet	dBA	63	66	63	63	61	56	53	50	41
L_wA to outlet	dBA	64	67	65	64	56	61	56	51	46
L_wA to environment	dBA	39	42	56	43	36	34	28	24	22

Designation key

Series	Rated air flow, m³/h	Heater type	Phase	Integrated control system
VENTS MPA	800; 1200; 1800; 2500; 3200; 3500; 5000	Е: electric; W: water	1: single phase; 3: three phase	LCD: integrated automation with A16 control panel

Accessories

Type	Replaceable filter	Filter type
MPA 800 E1	SF 442x275x47 G4	panel filter
MPA 1200 E3
MPA 1800 E3	SF 390x545x47 G4	panel filter
MPA 2500 E3
MPA 3200 E3	SF 653x440x47 G4	panel filter
MPA 3500 E3