Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS TwinFresh Comfo RA1-85 V.3

    VENTS TwinFresh Comfo RA1-85 V.3
    • VENTS TwinFresh Comfo RA1-85 V.3
    zoom
    • VENTS TwinFresh Comfo RA1-85 V.3
    Print versionSave in PDF format
    Air flow up to 85 m3/h.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Downloads
    • Dimensions
    • Dimensions
    • Ecodesign
    • Accessories
    Description
    Description
    TWINFRESH COMFO RA1-50 V.3 TWINFRESH COMFO RA1-85 V.3
       
    Power from 4.5 W Power from 4.74 W
    Air flow up to 50 m3/h Air flow up to 85 m3/h
    Sound pressure level from 13 dBA Sound pressure level from 19 dBA
       
    UNIVERSAL EFFICIENT USER-FRIENDLY
    Many units can be connected to one network. The ventilator can operate in a passive supply mode: the air shutters are open providing a natural air flow. The design of the unit allows easy maintenance of the ventilator.
         
    The humidity threshold in the room can be controlled by choosing one of three modes on the remote control. Night mode
    The ventilator switches to the first speed in the dark time of the day.    		 Easy mounting of the mounting plate by means of magnets.
         
    EASY CONTROL    
    The TwinFresh Comfo series
    ventilators are equipped
    with a remote control.

    Operation modes:

     - Night mode 

    The integrated light sensor sends a signal to switch the ventilator to low speed mode.

     - Speed switching   

     - Passive air supply 

    In this mode the shutters are open, but the fan does not operate.

     - Air supply 

    In this mode all ventilators will operate in supply mode irrespective of the maximum air supply setting.

     - Ventilation 

    All the ventilators in the network operate in permanent air extract or air supply mode. To ensure balanced ventilation at the stage of installation it is advisable to set one half of the ventilators to air supply mode and the other part of the ventilators to air extract mode.

     - Ventilation with heat recovery 

     - Humidity control mode selection   


    The ventilators can be connected into one network for centralized control.
    The signals from the control panel and the remote control, as well as
    from the humidity sensor, are received only by the master (main) ventilator.

      
    ADVANTAGES    
    Maximum ease of installation – mount into the wall, plug in and use. High efficiency – up to 90 %.
    Normal operation of the unit at temperatures down to -20 °C (-30 °C with a hood for a cold climate). Built-in humidity sensor for automation of unit operation.
    Connecting a large number of units to the network using control cables. Control via remote control or buttons on the unit casing.
    Automatic blocking off draughts by means of louver shutters when the unit is switched off. Noise from 13 to 34 dBA.
    Ventilation of premises with the area of about 40 m2 (the area is approximate and depends on the ventilation standards in your country). Higher degree of supply air purification can be achieved with an F7 filter.
        Electrical fuse on the board for increased electrical safety.
    OPERATION IN A NETWORK    
    • Any number of ventilators may be connected into one network.
    • Control is carried out through the first ventilator.
    HOW IS IT DESIGNED?    
    Characteristics
    Characteristics
    Parameter TwinFresh Comfo RA1-85 V.3
    1 Speed     		TwinFresh Comfo RA1-85 V.3
    2 Speed     		TwinFresh Comfo RA1-85 V.3
    3 Speed     		Measurement unit
    Speed 1 2 3 -
    Voltage 100-240 100-240 100-240 V
    Frequency 50/60 50/60 50/60 Hz
    Power 4.74 6.56 9.65 W
    Current 0.034 0.05 0.071 A
    SFP 0.59 0.8 0.82 W/l/s
    Air flow in ventilation mode 36 59 85 m³/h
    Air flow in ventilation mode 10 16 24 l/s
    Air flow in energy recovery mode 18 30 43 m³/h
    Air flow in energy recovery mode 5 8 12 l/s
    Shutters automatic automatic automatic -
    SEC Class A A A -
    Filter G3 (G4, F7 optional) G3 (G4, F7 optional) G3 (G4, F7 optional) -
    Transported air temperature -20*...+40 -20*...+40 -20*...+40 °С
    Sound pressure level at 1 m distance In accordance with ISO 3741: 2004 29 35 44 dBA (sone)
    Sound pressure level at 3 m distance 19 25 34 dBА
    Outdoor sound pressure attenuation according to DIN EN 20140 40 40 40 dBА
    Heat recovery efficiency according to DIBt LÜ-A 20 ≤ 90 ≤ 90 ≤ 90 %
    IP Code IP 24 IP 24 IP 24 -
    Functions Filter replacement indication, Timer, Humidity sensor Filter replacement indication, Timer, Humidity sensor Filter replacement indication, Timer, Humidity sensor -
    Remote control panel - - - -
    Duct 150 150 150 -
    * -30 °C when the EH-13 hood is applied -30 °C when the EH-13 hood is applied -30 °C when the EH-13 hood is applied -
    Files archieve
    Downloads
    Select document type
    • Advertising and printing products
    • Certificates
    • Technical documentation
    Name
    Download
    Show
    "VENTS TwinFresh Comfo RA1 V.3" product description 09-2021 (pdf 3.56Mb)
    "TwinFresh Comfo RA(1)-50(85) V.3" user's manual 12-2023 (V123EN-05) (pdf 3.9Mb)
    Download high quality image "VENTS TwinFresh Comfo RA1-50(85) V.3" (psd 26.12Mb)
    Download image "VENTS TwinFresh Comfo RA1-50(85) V.3" for your website (png 347.07Kb)
    Dimensions
    Characteristics
    Parameter Value Measurement unit
    Dimensions
    Dimensions
    TwinFresh Comfo RA1-85 V.3 TwinFresh Comfo RA1-85-2 V.3
    with a hood for thin walls
    Ecodesign
    Ecodesign
    Specific energy consumption (SEC) [kWh/(m2.a)] Cold Average

    Warm
    -82 А+ -39 А -15 Е
    Type of ventilation unit Bidirectional
    Type of drive installed Three-speed
    Type of heat recovery system Regenerative
    Thermal efficiency of heat recovery [%] 80
    Maximum air flow rate [m3/h] 25
    Power [W] 7
    Sound power level [dBA] 36.7
    Reference air flow rate [m3/s] 0.004
    Reference pressure difference [Pa] 0
    Specific power input (SPI) [W/(m3/h)] 0.286
    Control typology Local automatic control
    Maximum internal leakage rate [%] 2.7
    Maximum external leakage rate [%] 0
    Mixing rate of bidirectional units [%] 1
    The classification of the airflow sensitivity to pressure variations, according to EN 13141-8 [%] 0.4
    The classification of the indoor/outdoor air tightness, according to EN 13141-8 [m3/h] -
    Internet address http://ventilation-system.com/
    The annual electricity consumption (AEC) [kWh electricity/a] Cold Average Warm
    206 206 206
    The annual heating saved (AHS) [kWh primary energy/a] Cold Average Warm
    8695 4445 2010
    Specific energy consumption (SEC) [kWh/(m2.a)] Cold Average

    Warm
    -78 А+ -38 А -15 Е
    Type of ventilation unit Bidirectional
    Type of drive installed Three-speed
    Type of heat recovery system Regenerative
    Thermal efficiency of heat recovery [%] 69
    Maximum air flow rate [m3/h] 42
    Power [W] 9.65
    Sound power level [dBA] 45
    Reference air flow rate [m3/s] 0.008
    Reference pressure difference [Pa] 0
    Specific power input (SPI) [W/(m3/h)] 0.222
    Control typology Local automatic control
    Maximum internal leakage rate [%] 2.7
    Maximum external leakage rate [%] 0
    Mixing rate of bidirectional units [%] 1
    The classification of the airflow sensitivity to pressure variations, according to EN 13141-8 [%] 0.4
    The classification of the indoor/outdoor air tightness, according to EN 13141-8 [m3/h] -
    Internet address http://ventilation-system.com/
    The annual electricity consumption (AEC) [kWh electricity/a] Cold Average Warm
    161 161 161
    The annual heating saved (AHS) [kWh primary energy/a] Cold Average Warm
    8205 4194 1897
    Accessories
    Accessories
    Name Description
    EH-14 white 160 Plastic hood.
    Colour options:
    White
    Black
    Grey
    Terracotta
    Brown
    Beige
    EH-14 chrome 160   Grey plastic outer hood with a brushed stainless steel cover
    EH-17 white 160 Plastic hood.
    Colour options:
    White
    Black
    Grey
    Terracotta
    Brown
    Beige
    EH-2 grey 160 Grey painted stainless steel outer hood for thin walls
    EH-2 chrome 160 Polished stainless steel hood for thin walls
    EH-13 white 160 White painted aluminium outer hood for cold climate
    EH-13 chrome 160 Stainless steel ventilation hood for cold climate
    MVVM 162 05 Hood for mounting from inside
    MVMO 150 bV1s An Round metal grille
    MVM 152 bVs N Round stainless steel hood
    NP 60x204-0021 Kit for angular mounting with white colour grille
    NP 60x204-0082 Kit for angular mounting with stainless steel outer grille
    3805 Round telescopic air duct 300-500 mm
    3810 Round telescopic air duct 500-1000 mm
    TwinFresh R-50 pre-installation kit Kit for pre-installation
    TwinFresh Comfo RA1-50 V.3 completion kit Completion kit (for the TwinFresh Comfo RA1-50 V.3 model)
    RC TwinFresh Comfo R-50 Remote control
    SF TwinFresh R50 G3 G3 filter kit (2 pcs.)
    SFC 150x50 F7 F7 filter
    SFC 150x50 G4   G4 filter
    Similar products
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    How often do you use equipment selection program?