VENTS TwinFresh SA1-50-2
- Description
- Characteristics
- Downloads
- Dimensions
- Legend
Description
Description
|
|
FEATURES | |
|
|
TwinFresh R-50 with a round Ø150 mm air duct and automatic shutters | TwinFresh S1-50 with a square 164x164 mm air duct and automatic shutters | TwinFresh S-60 with a square 164x164 mm air duct |
TWINFRESH VENTILATOR DESIGN | |
|
|
VENTILATION GRILLE | |
|
|
Fan is OFF (the automatic shutters are closed) | Fan is ON (the louver shutters are opened) |
|
|
СERAMIC ENERGY ACCUMULATOR (REGENERATOR) | TELESCOPIC AIR DUCT |
|
|
AIR FILTERS | |
|
|
REVERSIBLE EC FAN | |
|
|
MOUNTING PLATE | |
|
|
OUTER VENTILATION HOOD | |
|
|
The outer hood EH is made of polymer coated aluminium. | The outer hood EH-2 for thin walls is made of polymer coated stainless steel. Due to its labyrinth structure of the outer hood air flow changes its direction several times and the ventilator is protected against direct wind impact. |
POWER CABLE | |
|
|
TWINFRESH VENTILATOR OPERATING LOGIC | |
|
|
|
|
TWINFRESH STANDARD CONTROL AND OPERATION MODES | |
|
|
One ventilator equipped with a control and power unit, i.e. TwinFresh RA, is capable to connect three TwinFresh R ventilators with no extra accessories. | One KVR or KVS control panel and several transformers are used for integration of several ventilators into a single ventilation network. |
VENTILATION SYSTEM ARRANGEMENT EXAMPLE BASED ON TWINFRESH VENTILATORS | |
|
|
TWINFRESH STANDARD MOUNTING EXAMPLE | |
Mounting into a wall with a standard thickness using EH outer hood | Mounting into a thin wall using EH-2 outer hood |
Angular mounting using NP 60x204-0021 kit (TwinFresh RA-50-5 model) |
Characteristics
Characteristics
Parameter |
TwinFresh SA1-50-2 |
Measurement unit |
---|---|---|
Speed | 2 | - |
Engine Type | 220В / 50Гц (EC) | - |
Voltage | 230 | V |
Power | 4.6 | W |
Current | 0.02 | A |
Air capacity | 50 | m³/h |
Frequency | 50 | Hz |
Maximum air capacity | 25 | m³/h |
Sound pressure level at 1 m | 34 | dBА |
RPM | 570 | min-1 |
Heat recovery efficiency | 90 | - |
Sound pressure level at 3 m | 14 | dBА |
Outdoor sound pressure attenuation | dBА | |
Shutters | automatic | - |
Remote control panel | Mechanical | - |
Сontrol unit availability | 1 | - |
Duct | 164x164 | - |
Max. transported air temperature | °С | |
Regenerator type | - | |
Protection rating | IP 24 | - |
Files archieve
Downloads
Select document type
Dimensions
Characteristics
Parameter | Value | Measurement unit |
---|
Legend
Legend
Item | Delivery scope | |||
---|---|---|---|---|
TwinFresh R-50 | 1. Ø150 mm round telescopic duct, 250-470 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Integrated automatic shutters with a thermal actuator. 6. Two filters with total G3 filter class. 7. Reversible axial fan with EC motor. 8. Integrated automation. The ventilator is controlled with the KVR control unit (upon separate order) and the TRF power transformer (upon separate order) to enable required power supply connection. |
|||
TwinFresh RА-50 | 1. Ø150 mm round telescopic duct, 250-470 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Integrated automatic shutters with a thermal actuator. 6. Two filters with total G3 filter class. 7. Reversible axial fan with EC motor. 8. Integrated automation. 9. Control and power unit for connection to 220 V / 50 Hz power mains. |
|||
TwinFresh S1-50 | 1. 164x164 mm square telescopic duct, 250-470 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Filter with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. The ventilator is controlled with the KVR control unit and the TRF power transformer to enable required power supply connection. |
|||
TwinFresh SА1-50 | 1. 164x164 mm square telescopic duct, 250-470 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Filter with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. 8. Control and power unit for connection to 220 V / 50 Hz power mains. |
|||
TwinFresh S-60 | 1. 164x164 mm square telescopic duct, 255-475 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Two filters with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. The ventilator is controlled with the KVR control unit and the TRF power transformer to enable required power supply connection. |
|||
TwinFresh SА-60 | 1. 164x164 mm square telescopic duct, 255-475 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Two filters with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. 8. Control and power unit for connection to 220 V / 50 Hz power mains. |
|||
TwinFresh R-50 pre-installation kit | 1. Ø150 mm round telescopic duct, 250-470 mm long. 2. Outer hood. 3. Plastic foam plug. |
|||
TwinFresh R-50 сompletion kit | 1. Ceramic energy accumulator (regenerator). 2. TwinFresh R-50 ventilation unit. 3. Two filters with total G3 filter class. |
|||
TwinFresh S1-50 pre-installation kit | 1. 164x164 mm square telescopic duct, 255-475 mm long. 2. Outer hood. 3. Plastic foam plug. |
|||
TwinFresh S1-50 сompletion kit | 1. Ceramic energy accumulator (regenerator). 2. TwinFresh S1-50 ventilation unit. 3. Filter with total G3 filter class. |
|||
TwinFresh S-60 pre-installation kit | 1. 164x164 mm square telescopic duct, 255-475 mm long. 2. Outer hood. 3. Plastic foam plug. |
|||
TwinFresh S-60 сompletion kit | 1. Ceramic energy accumulator (regenerator). 2. TwinFresh S-60 ventilation unit. 3. Filter with total G3 filter class. |