VENTS TwinFresh Solar SA-60
- Description
- Characteristics
- Downloads
- Dimensions
- Legend
Description
Description
|
|
FEATURES: | |
|
|
![]() |
![]() |
TwinFresh Solar SA-60 with a square 164x164 mm air duct | TwinFresh Solar SA-60 Pro with a square 164x164 mm air duct and a battery |
TWINFRESH VENTILATOR DESIGN | |
|
|
![]() |
|
VENTILATION GRILLE | |
|
|
![]() |
![]() |
Fan is OFF (the automatic shutters are closed) | Fan is ON (the louver shutters are opened) |
|
|
СERAMIC ENERGY ACCUMULATOR (REGENERATOR) | REVERSIBLE EC FAN |
|
|
MOUNTING PLATE | |
|
|
TELESCOPIC AIR DUCT | |
|
|
AIR FILTERS | |
OUTER VENTILATION HOOD | |
|
|
|
|
![]() |
![]() |
The outer hood EH is made of polymer coated aluminium. | The outer hood EH-2 for thin walls is made of polymer coated stainless steel. Due to its labyrinth structure of the outer hood air flow changes its direction several times and the ventilator is protected against direct wind impact. |
POWER CABLE | |
|
|
TWINFRESH VENTILATOR OPERATING LOGIC | |
|
|
![]() |
|
CYCLE I. Warm stale air is extracted from the room, then it passes through the ceramic energy accumulator and while flowing through it, heats and moistens the ceramic accumulator and transfers up to 90% of the contained thermal energy. As the ceramic accumulator gets heated, the ventilator switches to supply mode automatically. |
CYCLE II. Clean fresh air from outside passes through the ceramic energy accumulator, absorbs moisture and is heated up to the room temperature due to the accumulated heat. As temperature of the accumulator drops down, the fan switches to extract mode and the cycle is renewed. The ventilator changes its operation mode between supply and extract ventilation every 70 seconds. |
TWINFRESH SOLAR CONTROL AND OPERATION MODES | |
![]() |
|
|
|
VENTILATION SYSTEM ARRANGEMENT EXAMPLE BASED ON TWINFRESH VENTILATORS | |
![]() |
|
|
|
![]() |
|
TWINFRESH SOLAR MOUNTING EXAMPLE | |
![]() |
![]() |
Mounting into a wall with a standard thickness using EH outer hood | Mounting into a thin wall using EH-2 outer hood |
Characteristics
Characteristics
Parameter |
TwinFresh Solar SA-60 |
Measurement unit |
---|---|---|
Speed | 2 | - |
Voltage | 12 | V |
Power | 2.8 | W |
Current | 0.018 | A |
Air capacity | 58 | m³/h |
Maximum air capacity ![]() |
58 | m³/h |
Sound pressure level at 1 m | 41 | dBА |
RPM | 2100 | min-1 |
Heat recovery efficiency | 88 | - |
Sound pressure level at 3 m | 24 | dBА |
Outdoor sound pressure attenuation ![]() |
dBА | |
Shutters | - | - |
Remote control panel | Mechanical | - |
Duct | 164x164 | - |
Max. transported air temperature ![]() |
°С | |
Regenerator type ![]() |
- | |
Protection rating | IP 24 | - |
Files archieve
Downloads
Select document type
Dimensions
Characteristics
![VENTS TwinFresh Solar SA-60](/uploads/productCard/7249_schema.jpg)
Parameter | Value | Measurement unit |
---|
Legend
Legend
Item | Delivery scope | |||
---|---|---|---|---|
TwinFresh Solar SA-60 |
![]() |
1. 164x164 mm square telescopic duct, 255-475 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Two filters with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. 8. Solar panel. 9. KVS control unit. |
||
TwinFresh Solar SA-60 Pro |
![]() |
1. 164x164 mm square telescopic duct, 255-475 mm long. 2. White polymer coated aluminium outer hood. 3. Ceramic energy accumulator (regenerator). 4. White ABS plastic decorative front grille. 5. Two filters with total G3 filter class. 6. Reversible axial fan with EC motor. 7. Integrated automation. 8. Solar panel. 9. Battery. |