VENTS Uni

Print version Save in PDF format

Centralised ventilation unit for small apartments. Air flow: up to 160 m³/h.

Add to project

Add to compare

Description
Characteristics
Downloads
Dimensions
Dimensions
Sound power level
Energy labeling
Automation functions
Accessories

Description

FEATURES

Efficient centralised ventilation unit for small apartments.
Can be installed vertically on the wall, or suspended under the ceilling.
Concealed installation is possble due to optional revision door.

Clean air due to the use of an ePM1 70% / F7 filter for supply air filtration.
Low noise operation from 13 dB(A) at 3 m.
Simple installation due to variable location of the spigots.

CASING

HEAT RECOVERY

The casing is made of galvanized sheet metal. The unit is heat- and sound-insulated with a 20 mm layer of foam. The service panel is easy to open for filter maintenance.

The Uni unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger. The Uni E unit is equipped with an enthalpy plate counter-flow heat exchanger for heat and humidity recovery.
The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.
Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively. In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

USP

The unit is equipped with four ø125 mm spigots. The position of the spigots can be changed to simplify duct installation.
Flanges can be installed in three different directions providing wide range of installation options.

CONTROL AND AUTOMATION

The Uni А21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately).
The А21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System). Unit control via Wi-Fi using the mobile application Vents AHU.
The Uni А14 units are equipped with an integrated automation system and the А14 wall mounted sensor control panel with LED-indication.


Download the Vents AHU app for Android	Download the Vents AHU app for iOS

FANS

The units feature high-performance, electronically commutated (EC) external rotor motors with forward curved blades. These state-of-the-art units offer excellent energy efficiency. In addition to that, EC motors combine high performance and optimum control over the entire speed range. EC motors have an excellent power efficiency (up to 90 %).

MOUNTING

Characteristics

Parameter	VENTS Uni 60 m³/h	VENTS Uni 90 m³/h	VENTS Uni 160 m³/h	Measurement unit
Phase	1	1	1	˜
Voltage	230	230	230	V
Frequency	50/60	50/60	50/60	Hz
Max. unit current without electric heater	0.5	0.5	0.5	A
Operating temperature	-25...+40	-25...+40	-25...+40	°С
Max. air capacity	160	160	160	m³/h
RPM	2800	2800	2800	min^-1
Max. unit power without electric heater	58	58	58	W
Insulation	20	20	20	-
Sound pressure level LpA to environment at 1 m distance	23	34	42	dBА
Sound pressure level LpA to environment at 3 m distance	13	26	33	dBА
Connected air duct diameter	125	125	125	mm
Heat recovery efficiency	84-95	84-95	84-95	%
Casing material	aluzinc	aluzinc	aluzinc	-
Filter: extract	Coarse 90% / G4	Coarse 90% / G4	Coarse 90% / G4	-
Filter: supply	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	-
Heat exchanger material	polystyrene	polystyrene	polystyrene	-
Heat exchanger type	counter-flow	counter-flow	counter-flow	-
Duct	for round air ducts	for round air ducts	for round air ducts	-
Weight	31	31	31	kg
SEC Class	A+	A+	A+	-
Humidity recovery efficiency	-	-	-	%
Mounting	flush mounting, wall mounting, ceiling mounting	flush mounting, wall mounting, ceiling mounting	flush mounting, wall mounting, ceiling mounting	-

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Dimensions

Sound power level

Sound power level, A-weighted	General	Octave frequency bands, Hz									LpA, 3 m	LpA, 1 m
Sound power level, A-weighted	dB(A)	200	250	315	400	500	630	800	1000	1250	dB(A)	dB(A)
L_wA to environment @ 160 m³/h (0 Pa)	53	38	36	40	45	50	42	43	41	38	33	42
L_wA to environment @ 90 m³/h (0 Pa)	45	26	32	38	37	37	35	34	34	31	26	34
L_wA to environment @ 60 m³/h (0 Pa)	34	22	22	22	25	25	23	22	21	18	13	23
L_wA to supply air outlet @ 160 m³/h (0 Pa)	48	32	32	38	36	40	30	43	39	30	27	37
L_wA to supply air outlet @ 90 m³/h (0 Pa)	41	26	28	34	29	29	23	35	32	22	20	30
L_wA to supply air outlet @ 60 m³/h (0 Pa)	32	20	19	21	18	18	13	24	21	14	12	21
L_wA to exhaust air inlet @ 160 m³/h (0 Pa)	50	27	24	40	42	46	30	26	29	33	29	39
L_wA to exhaust air inlet @ 90 m³/h (0 Pa)	47	37	23	44	34	37	27	23	27	29	26	36
L_wA to exhaust air inlet @ 60 m³/h (0 Pa)	34	23	14	24	24	26	19	15	16	17	14	23

Sound power level, A-weighted	General	Octave frequency bands, Hz									LpA, 3 m	LpA, 1 m
Sound power level, A-weighted	dB(A)	1600	2000	2500	3150	4000	5000	6300	8000	10000	dB(A)	dB(A)
L_wA to environment @ 160 m³/h (0 Pa)	53	37	35	33	31	27	23	21	24	25	33	42
L_wA to environment @ 90 m³/h (0 Pa)	45	30	28	26	24	21	19	20	23	25	26	34
L_wA to environment @ 60 m³/h (0 Pa)	34	18	17	16	15	15	16	16	20	21	13	23
L_wA to supply air outlet @ 160 m³/h (0 Pa)	48	34	32	30	28	22	19	19	23	24	27	37
L_wA to supply air outlet @ 90 m³/h (0 Pa)	41	26	23	23	22	18	18	19	23	24	20	30
L_wA to supply air outlet @ 60 m³/h (0 Pa)	32	17	16	17	17	17	18	19	23	24	12	21
L_wA to exhaust air inlet @ 160 m³/h (0 Pa)	50	38	36	38	34	29	26	28	25	24	29	39
L_wA to exhaust air inlet @ 90 m³/h (0 Pa)	47	33	31	33	30	25	24	21	24	24	26	36
L_wA to exhaust air inlet @ 60 m³/h (0 Pa)	34	22	20	24	18	17	18	19	23	24	14	23

Energy labeling

Supplier model identifier and options installed	Uni
Reference climate	Cold/Average/Warm
SEC in [kWh/(m²a)] for each type of climate	-82.6/-42.9/-17.5
SEC Class	A+
Declared typology	BVU
Type of drive installed	Variable speed
Type of heat recovery	Recuperative
Thermal efficiency*	91
Maximum flow rate in [m³/h]	130
Maximum electric power in [W]	55
Sound power level (LWA) in [dB(A)]	46
Reference flow rate [m³/s]	0.025
Reference pressure difference in [Pa]	50
SPI in [W/m³/h]	0.286
Control factor and typology	Local demand control
Internet address	http://www.ventilation-system.com/

*Efficiency according EN13141-7:2010 at reference flow rate

Automation functions

Functions

Uni A21

Uni A14

Unit control via Wi-Fi using a mobile application

–

Unit control via a wired remote control panel

A22 control panel (option)

A14 control panel

Unit control via a wireless remote control panel

A22 Wi-Fi control panel (option)

–

Unit control via a remote wired LCD control panel

A25 control panel (option)

–

BMS (Building Management System)

RS-485

–

Wi-Fi

–

Ethernet

–

MODBUS (RTU, TCP)

–

Speed selection

Filter replacement indication

by filter timer

Alarm indication

full alarm description in the mobile application

Week-scheduled operation

–

Bypass

automatic

manual

–

Timer

–

Boost mode

–

Fireplace mode

–

Freeze protection

through cyclic stops of the supply fan

through preheating (option)

–

Reheater connection

option

–

Cooler connection

option

–

Minimum supply air temperature control

option

–

Humidity control

option

CO₂ control

option

VOC control

option

PM2.5 control

option

Fire alarm sensor connection

option

–

Accessories

	Uni R A14 Uni L A14	Uni ERV R A14 Uni ERV L A14	Uni R A21 Uni L A21	Uni ERV R A21 Uni ERV L A21
Coarse 90% / G4 panel filter	SF 233x175x22 Coarse 90% / G4
ePM1 70% / F7 panel filter	SF 233x175x22 ePM1 70% / F7
Control panel	-		A22
Wireless control panel	-		A22 Wi-Fi
LCD control panel	-		A25
Humidity sensor	HV2
Humidity sensor	HR-S
Humidity sensor	-		DPWC11200
CO₂ sensor	CO2-2
CO₂ sensor with indication	CO2-1
CO₂ sensor	CO2-3
CO₂ sensor	-		DPWQ40200
VOC sensor	-		DPWQ30600
Electric reheater	NKD 125 A21 V.2 series
Outer grille	MVMA 125 bVn Al
Access doors	DMZ21 850х1160