VENTS Uni Max ERV

Print version Save in PDF format

Decentralized unit for the small offices, facilities, classrooms and living spaces. Air flow: up to 160 m³/h.

Add to project

Add to compare

Description
Characteristics
Downloads
Dimensions
Dimensions
Sound power level
Energy labeling
Automation functions
Product range
Accessories

Description

FEATURES

Efficient decentralized ventilation unit for small offices or conference rooms.
Visible ceiling suspended installation.
A version with electrical preheater is available for cold climate.
Clean air due to the use of an ePM1 70% / F7 filter for supply air filtration.

Possibility to connect fresh air inlet and exhaust air ducts at top or back side of the unit.
Low noise operation from 16 dB(A) at 3m.
High level of comfort due to builtin bypass and air dampers.

CASING

PREHEATING

The casing is made of galvanized sheet metal with white painted decorative cover.
The contemporary design of the Uni Max unit will seamlessly blend into any interior.
The unit is heat- and sound-insulated with a 20 mm layer of foam.
The service panel is easy to open for filter maintenance.
The unit is equipped with two Ø125 mm spigots for fresh air intake and stale air exhaust.
The position of the spigots can be changed from horizontal to vertical.

The Uni Max E S21 units are equipped with an electrical preheater to prevent heat exchanger freezing in the cold climate.

BYPASS

The Uni Max units are equipped with a bypass for summer cooling by the cool air from outside.

AIR DAMPERS

HEAT RECOVERY

The Uni Max unit is equipped with two automatic air dampers, which close automatically when the unit is off to prevent drafts.

The Uni Max unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger.
The Uni Max E unit is equipped with an enthalpy plate counter-flow heat exchanger for energy (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.
The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.
Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates.
In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.
In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air.That reduces operation load on air conditioners and saves electricity.

FANS

The units feature high-performance, electronically commutated (EC), external rotor motors with forward curved blades.
These state-of-the-art units offer excellent energy efficiency.
In addition to that, EC motors combine high performance and optimum control over the entire speed range.
EC motors have an excellent power efficiency (up to 90 %).

AIR DISTRIBUTION

CONTROL AND AUTOMATION

The Uni Max А21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately).
The А21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System).
Unit control via Wi-Fi using the mobile application Vents AHU. The Uni Max А14 units are equipped with an integrated automation system and the А14 wall mounted sensor control panel with LED-indication.


Download the Vents AHU app for Android	Download the Vents AHU app for iOS

MOUNTING

Characteristics

Parameter	VENTS Uni Max ERV 60 m³/h	VENTS Uni Max ERV 90 m³/h	VENTS Uni Max ERV 160 m³/h	Measurement unit
Frequency	50/60	50/60	50/60	Hz
Phase	1	1	1	˜
Voltage	230	230	230	V
Max. unit current without electric heater	0.5	0.5	0.5	A
Electric preheater power	-	-	-	W
Operating temperature	-25...+40	-25...+40	-25...+40	°С
Max. unit current with electric heater	-	-	-	A
Max. air capacity	160	160	160	m³/h
RPM	2800	2800	2800	min^-1
Max. unit power without electric heater	58	58	58	W
Insulation	20	20	20	-
Sound pressure level LpA to environment at 1 m distance	25	35	42	dBА
Sound pressure level LpA to environment at 3 m distance	16	26	32	dBА
Connected air duct diameter	125	125		mm
Heat recovery efficiency	74-89	74-89	74-89	%
Casing material	aluzinc	aluzinc	aluzinc	-
Filter: extract	Coarse 90% / G4	Coarse 90% / G4	Coarse 90% / G4	-
Filter: supply	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	-
Heat exchanger material	enthalpic membrane	enthalpic membrane	enthalpic membrane	-
Heat exchanger type	counter-flow	counter-flow	counter-flow	-
Duct	for round air ducts	for round air ducts	for round air ducts	-
Weight	47	47	47	kg
SEC Class	A	A	A	-
Humidity recovery efficiency	47-60	47-60	47-60	%
Mounting	ceiling mounting	ceiling mounting	ceiling mounting	-

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Dimensions

Sound power level

Sound power level, A-weighted	General	Octave frequency bands, Hz									LpA, 3 m	LpA, 1 m
Sound power level, A-weighted	dB(A)	200	250	315	400	500	630	800	1000	1250	dB(A)	dB(A)
L_wA to environment @ 160 m³/h	53	37	41	41	45	49	40	42	41	38	32	42
L_wA to environment @ 90 m³/h	46	31	37	43	36	35	33	34	33	30	26	35
L_wA to environment @ 60 m³/h	36	32	25	24	25	24	23	23	21	19	16	25

Sound power level, A-weighted	General	Octave frequency bands, Hz									LpA, 3 m	LpA, 1 m
Sound power level, A-weighted	dB(A)	1600	2000	2500	3150	4000	5000	6300	8000	10000	dB(A)	dB(A)
L_wA to environment @ 160 m³/h	53	37	37	35	31	27	23	21	24	25	32	42
L_wA to environment @ 90 m³/h	46	29	29	27	24	21	19	19	23	24	26	35
L_wA to environment @ 60 m³/h	36	18	18	19	17	17	18	19	23	24	16	25

Energy labeling

Supplier model identifier and options installed	Uni Max (Е)ERV
Reference climate	Cold/Average/Warm
SEC in [kWh/(m²a)] for each type of climate	-76,9/-40,2/-16,5
SEC Class	A
Declared typology	BVU
Type of drive installed	Variable speed
Type of heat recovery	Recuperative
Thermal efficiency*	78
Maximum flow rate in [m³/h]	160
Maximum electric power in [W]	58
Sound power level (LWA) in [dB(A)]	48
Reference flow rate [m³/s]	0.031
Reference pressure difference in [Pa]	0
SPI in [W/m³/h]	0.232
Control factor and typology	Local demand control
Internet address	http://www.ventilation-system.com/

*Efficiency according EN13141-7:2010 at reference flow rate

Automation functions

Functions

Uni Max A21

Uni Max A14

Unit control via Wi-Fi using a mobile application

–

Unit control via a wired remote control panel

A22 control panel (option)

A14 control panel

Unit control via a wireless remote control panel

A22 Wi-Fi control panel (option)

–

Unit control via a remote wired LCD control panel

A25 control panel (option)

–

BMS (Building Management System)

RS-485

–

Wi-Fi

–

Ethernet

–

MODBUS (RTU, TCP)

–

Speed selection

Filter replacement indication

by filter timer

Alarm indication

full alarm description in the mobile application

Week-scheduled operation

–

Bypass

automatic

manual

–

Timer

–

Boost mode

–

Fireplace mode

–

Freeze protection

through cyclic stops of the supply fan

through preheating (option)

–

Reheater connection

option

–

Cooler connection

option

–

Minimum supply air temperature control

option

–

Humidity control

option

CO₂ control

option

VOC control

option

PM2.5 control

option

Fire alarm sensor connection

option

–

Product range

	Heat exchanger	Air dampers	Preheater	Bypass
Uni Max S14	HRV	•		•
Uni Max S21		•		•
Uni Max E S21		•	•	•
Uni Max ERV S14	ERV	•		•
Uni Max ERV S21		•		•
Uni Max E ERV S21		•	•	•

Accessories

	Uni Max S14 Uni Max ERV S14	Uni Max S21 Uni Max E S21	Uni Max ERV S21 Uni Max E ERV S21
Coarse 90% / G4 panel filter	SF 233x175x22 Coarse 90% / G4
ePM1 70% / F7 panel filter	SF 233x175x22 ePM1 70% / F7
Control panel	-	A22
Wireless control panel	-	A22 Wi-Fi
LCD control panel	-	A25
Humidity sensor	HV2
Humidity sensor	HR-S
Humidity sensor	-	DPWC11200
CO₂ sensor with indication	CO2-1
CO₂ sensor	CO2-2
CO₂ sensor	CO2-3
CO₂ sensor	-	DPWQ40200
VOC sensor	-	DPWQ30600
Electric reheater	NKD 125 A21 V.2 series
Outer grille	MVMA 125 bVn Al