Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 LP (220/60)

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Modifications
  • Dimensions
  • Designation key
Description
Description
APPLICATIONS  
  • Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens, and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Low to medium air flow motion for short distances at low air resistance.
  • Compatible with Ø 100 mm air ducts.
DESIGN  
  • Modern design and aesthetic look.
  • The front panel is made of high-quality durable ABS plastic, UV resistant. The casing and the impeller are made of polypropylene.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • Protection rating IP24.
MOTOR  
  • Reliable and low-watt electric motor.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.
CONTROL  

Manual:

  • The fan is controlled by a room light switch. It is not included in the delivery set.
  • The fan is controlled by a built-in pull cord switch V.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may be connected to the same controller. Speed controllers can not be connected to the fans with T, TH modifications.

Automatic:

  • By a BU-1-60 electronic control unit (see Electrical Accessories). The control unit is supplied separately.
  • By a T timer (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By a humidity sensor and a TH timer (if the humidity level in the room exceeds the sensor threshold value adjustable within 60-90 %, the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then it shuts down).
MOUNTING FEATURES  
  • The fan is mounted directly into the ventilation shaft.
  • Fixed to the wall by means of screws.
  • In case of remote location of the ventilation shaft, flexible air ducts may be used. The air duct is connected to the fan exhaust flange through a clamp.
MOUNTING EXAMPLE  
Characteristics
Characteristics
Parameter VENTS 100 LP (220/60)
VENTS 100 LP T (220/60)
VENTS 100 LP TH (220/60)
VENTS 100 LP V (220/60)
Measurement unit
Voltage 220 220 220 220 V
Frequency 60 60 60 60 Hz
Power consumption 14 14 14 14 W
Maximum air capacity 94 94 94 94 m³/h
Current 0.097 0.097 0.097 0.097 A
RPM 2400 2400 2400 2400 min-1
Sound pressure level at 3 m 36 36 36 36 dBА
Weight 0.55 0.55 0.55 0.55 kg
Spigot size 100 100 100 100 mm
Engine Type 220V / 60Hz 220V / 60Hz 220V / 60Hz 220V / 60Hz -
Design axial axial axial axial -
Duct diameter 100 100 100 100 mm
IP Code IP 24 IP 24 IP 24 IP 24 -
Type exhaust exhaust exhaust exhaust -
Mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS LP" product description 08-2020 (pdf 2.22Mb)
Download high quality image "VENTS LP" (psd 2Mb)
Download image "VENTS LP" for your website (png 423.45Kb)
Modifications
Modification name Humidity sensor Timer Pull-cord switch
VENTS 100 LP (220/60) - - -
VENTS 100 LP T (220/60) - -
VENTS 100 LP TH (220/60) -
VENTS 100 LP V (220/60) - -
+
+
+
+
Dimensions
Characteristics
VENTS 100 LP (220/60)
Parameter Value Measurement unit
Ø D 100 mm
B 154 mm
L 50 mm
L1 22 mm
Designation key
Designation key
PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
LP T equipped with a regulated timer with the operating time from 2 to 30 minutes.
LP TH equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold range from 60 to 90 %.
LP V equipped with a pull cord switch.
Share your opinion

Questionnaire
Is our site helpful for your business development?