Inline centrifugal fan VENTS VKM 125 EC

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Additional characteristics
Designation key

Description

APPLICATION
Supply and exhaust ventilation and air conditioning systems for various premises requiring cost-effective solution and controllable ventilation. EC motors applied in VKM fans reduce energy demand by about 35 % and ensure high aerodynamic performance and low noise level. Such characteristics are of special importance for ventilation of public premises as banks, supermarkets, restaurants, hotels, installation close to residential buildings and for domestic application, e.g. ventilation of private pools.	EC motors enable integration of several fans into a unified networks and their centralized control. The steel casing ensures reliable operation of the fan in case of its outside installation. The fans are designed for connection to Ø 100, 125, 150, 160, 200, 250, 315, 355 and 400 mm air ducts.
DESIGN
The fan casing is made of polymer coated steel.	New technologies for manufacture of the fan components let attain the total casing air tightness.
MOTOR
The impellers with backward curved blades are powered with a high efficient electronically commutated (EC) direct current motor with external rotor. As of today, such motor type is the most advanced solution for energy saving. EC motors are featured by high performance and the best speed controllable range. Premium efficiency reaching up to 90 % is the absolute advantage of electronically commutated motors.	The motors are equipped with ball bearings for longer service life of the fan (40 000 hours). For precise features, safe operation and low noise, each turbine is dynamically balanced while assembly. Motor ingress protection rating IP44.
SPEED CONTROL
The fan is controlled with the external control signal 0-10 V (air flow control as a function of temperature, pressure, smoke conditions and other parameters). Should the control value get changed, the EC motor adjusts its speed and the fan boosts as much air flow to the ventilation system as required. Maximum speed of the fan does not depend on the current frequency and it can operate at 50 or 60 Hz mains supply.	The fans may be integrated into the unified dispatch system. The respective software enables to control all the fan integrated into the system. The computer displays all the system parameters. Each fan in the system may be individually adjusted.
MOUNTING
The fans may be installed at any angle. The fixing brackets that are included into the delivery set are used to facilitate the fan mounting to the wall.	The fan is connected to power mains through the external terminal box.

Characteristics

Parameter	VKM 125 EC	Measurement unit
Low-powered motor	no	-
High-power version	no	-
Phase	1	˜
Voltage	230	V
Frequency	50/60	Hz
Sound pressure level at 3 m distance	45	dBА
Air capacity	480	m³/h
Power consumption	83	W
Current	0.58	A
EC motor	yes	-
RPM	3400	min^-1
Max. transported air temperature	-25 +60	°С
Protection rating	IP X4	-
Design	centrifugal	-
Weight	3.2	kg
Duct diameter	125	mm
Casing material	polymer coated steel	-
Outdoor mounting	yes	-
SEC Class	B	-
Duct	for round air ducts	-
Type	supply and exhaust	-
Mounting	outdoor mounting, Inline	-
*	To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor).	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
∅D	123	mm
ØD1	255	mm
B	310	mm
B1	270	mm
H	340	mm
L	203	mm
L1	20	mm
L2	25	mm
L3	30	mm

Additional characteristics

Sound-power level, A - weighted		Octave-frequency band [Hz]									LpA, 3 m [dBА]	LpA, 1 m [dBА]
	Hz	Gen.	63	125	250	500	1000	2000	4000	8000	LpA, 3 m [dBА]	LpA, 1 m [dBА]
L_wA to inlet	dBА	91	62	83	90	79	74	71	65	54	71	81
L_wA to outlet	dBА	90	69	83	89	78	71	68	63	52	70	80
L_wA to environment	dBА	65	27	48	58	59	60	60	49	37	45	55

Designation key

Series	Air duct diameter [mm]	Motor	Options
VENTS VKM VENTS VKMS: high-power version	100; 125; 150; 160; 200; 250; 315; 355; 400	ЕС: electronically commutated synchronous motor	Un: speed controller with an electronic thermostat and a temperature sensor fixed on a 4-meter cable. Temperature-based operation logic. U2n: speed controller with an electronic thermostat and a temperature sensor fixed on a 4-meter cable. Temperature-based switching on/off. R1: power cord with a mains plug. P: integrated smooth speed controller.