VENTS VUE 150 P3B EC A14

Description

APPLICATION

The air handling units VUE P3B EC are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.

FANS

High-efficient electronically-commutated (EC) motors with an external motor.
The VUE 100 P3B EC A14, VUE 150 P3B EC A14 and VUE 250 P3B EC A14 are equipped with centrifugal impellers with forward curved blades.
The VUE 350 P3B EC A14 are equipped with centrifugal impellers with backward curved blades.

HEAT RECOVERY

Enthalpy cross-flow heat exchanger made of polymerized cellulose with heat recovery efficiency up to 85 %.
The applied heat exchanger enables not only heat but also humidity recovery.

BYPASS

The units are equipped with a bypass for summer ventilation (air cooling by the cool air from outside).

AIR FILTRATION

Two built-in panel filters with filtering class G4 and F8 provide efficient supply air filtration.
Extract air is cleaned by the built-in G4 filter.

DESIGN

The casing is made of polymer-coated steel panels, internally filled with polyurethane foam layer 5 or 10 mm for heat- and sound-insulation.

CONTROL AND AUTOMATION

The VENTS VUE P3B EC A14 units have an integrated automation system with a wall-mounted control panel A14 with a LED indication.
The units are equipped with a USB connector (Type B) and can be connected to a PC for configuring the advanced settings in a special software.

The standard delivery set includes a 10 m cable for connection of the unit to the control panel.

A14 automation functions:

Additional functions of the A14 automation with installed software

Fan speed adjustment from 0 to 100 %.
Each speed is individually adjusted for the supply and the extract fans.
Operation control on feedback from the HV-2 duct humidity sensor (to be ordered separately).
Unit operation setting according to the external relay (to be ordered separately).
Temperature setting for heat exchanger freeze protection system activation.
Control and operation adjustment of the filter maintenance timer.
Error code indication.
Software version upgrading.
External relay, bypass and humidity control.

INSTALLATION

Due to a low casing height the air handling units are a perfect solution for space-restricted installation above suspended ceilings.

APPLICATION

Characteristics

Parameter	VUE 150 P3B EC A14	Measurement unit
Frequency	50/60	Hz
Phase	1	˜
Voltage	230	V
Maximum unit power	83	W
Maximum unit current	0.7	A
Sound pressure level at 3 m distance	32	dBА
Air capacity	215	m³/h
RPM	2000	min^-1
Heat recovery efficiency	68...82	%
Humidity recovery efficiency	22...41	%
Transported air temperature	-5...+40	°С
Casing material	painted steel	-
Insulation	5 mm, 10 mm polyurethane foam	-
Filter: extract	G4	-
Filter: supply	G4, F8	-
Connected air duct size	100	mm
PM 2.5 filtration efficiency	93	%
Weight	26	kg
Heat exchanger type	cross-flow	-
Heat exchanger material	polymerized cellulose	-
SEC Class	A	-
Type	supply and exhaust	-

Capacity diagram

Operating point

Files archieve

Downloads

Dimensions

Characteristics

Designation key

Series	Rated air flow [m³/h]	Mounting type	Casing modification	Bypass	Motor type	Service side	Control panel
VENTS VUE	100; 150; 250; 350	P: suspended	З: low-profile unit	B: integrated bypass	ЕС: synchronous electronically commutated motor	L: left R: right	А14

Video

Accessories

Model	G4 panel filter	F8 panel filter	Internal humidity sensor (0-10 V)	External CO₂ sensor	External CO₂ sensor with indication	External humidity sensor	Hydraulic kit	Air dampers	Electric actuator
Model
VUE 100 P3B EC A14	SF 200х191х20 G4	SF 200х191х20 F4	HV-2	CO2-1	CO2-2	HR-S	SG-32	KRV 100	LF230
VUE 150 P3B EC A14	SF 300х220х48 G4	SF 300х220х48 F8						KRV 100
VUE 250 P3B EC A14	SF 300х220х48 G4	SF 300х220х48 F8						KRV 150
VUE 350 P3B EC A14	SF 300х270х48 G4	SF 300х270х48 F8						KRV 150