VUT 100 P mini

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Dimensions
Designation key
Accessories
BIM

Description

DESCRIPTION
Compact air supply and exhaust ventilation unit VUE 100 P mini is a simple and effective energy-saving solution ventilation of apartments, cottages, single-family houses, workshops and trade premises. The unit is a fully-featured ventilation unit that provides air cleaning, fresh air supply to the premise and removal of extract air from the premise.	Extract air thermal energy is transferred to the cross-flow heat exchanger and is used to warm up the supply air flow. Built-in heat exchanger prevents heat losses and saves operating costs for heating in winter and air conditioning in summer.
CASING
The casing is made of corrosion-resistant alumozink and sound-insulated with 15 mm cellular polyethylene layer. For easy mounting the casing is fitted with mounting brackets.	The detachable panel is swivel connected to the unit to provide fast and easy access to the casing internal components for servicing and maintenance. The unit is equipped with two backdraft dampers, one in the supply and the other in the exhaust air duct.
FILTER
Supply and extract air flows are purified through two filters with filtering class G4.	The filters prevent dirt and dust ingress into the room and protect the unit components against contaminations.
FANS
The unit is equipped with reliable supply and exhaust fans with forward curved blades that are powered by motors with low energy demand.	The motor has maintenance-free ball bearings that ensure long service life about 40 000 hrs and are greased for the operation period.
HEAT EXCHANGER VENTS VUE 100 P MINI	HEAT EXCHANGER VENTS VUT 100 P MINI
Cross-flow enthalpy heat exchanger with heat recovery efficiency from 64 % up to 72 % enables not only heat but humidity recovery and provides indoor humidity balance. In summer season the heat exchanger serves for intake air cooling down and drying and in winter season for warming up and moisturizing. Water vapour is extracted from wet extract air and is absorbed by the heat exchanging plates.	The unit is equipped with a high-efficient cross-flow plastic heat exchanger and a drain pan for condensate drainage.

CONTROL	HEAT EXCHANGER PROTECTION
Air flow (speed) is regulated with A3 (P3-1-300) speed switch. Low speed – 55 m³/h, 24 dBA Medium speed – 74 m³/h, 32 dBA Maximum speed – 100 m³/h, 41 dBA The external speed switch is comfortable to use at any place.	For freeze protection at low temperatures the unit is equipped with a thermostat inside the casing that switches the supply fan off in case of freezing danger to let extract air warm up the heat exchanger.
MOUNTING
Due to the compact casing height the unit is designed for horizontal indoor installation behind suspended ceilings and connection to Ø 125 mm round air ducts.

Characteristics

Parameter	VUT 100 P mini	VUT 100 P mini	VUT 100 P mini	Measurement unit
Speed	min	med	max	-
Frequency	50	50	50	Hz
Phase	1	1	1	-
Voltage	230	230	230	V
Air capacity	55	74	100	m³/h
Unit power	30	38	56	W
Unit current	0.18	0.23	0.34	A
RPM	1300	1950	2500	min^-1
Sound pressure level at 3 m	24	32	41	dBА
Transported air temperature	-25 ... +40	-25 ... +40	-25 ... +40	°С
Filter: extract	G4	G4	G4	-
Filter: supply	G4	G4	G4	-
Heat recovery efficiency	65...76	65...76	65...76	%
Heating	without heating	without heating	without heating	-
Casing material	aluzinc	aluzinc	aluzinc	-
Insulation	15 mm cellular polyethylene	15 mm cellular polyethylene	15 mm cellular polyethylene	-
Weight	13	13	13	kg
Heat exchanger type	cross-flow	cross-flow	cross-flow	-
Heat exchanger material	plastic	plastic	plastic	-
Connection diameter	125	125	125	mm
Type	supply and exhaust with heat recovery	supply and exhaust with heat recovery	supply and exhaust with heat recovery	-
SEC Class	D	D	D	-
Mounting	flush mounting, ceiling mounting	flush mounting, ceiling mounting	flush mounting, ceiling mounting	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Dimensions

Designation key

Series	Rated air flow [m³/h]	Mounting type	Type
VUT: ventilation with heat recovery VUE: ventilation with energy recovery	100	P: suspended	mini

Accessories

Model	G4 panel filter	Summer blocks	Silencers		Back valves	Air dampers	Clamps

VUT 100 P mini	SF 200х190х18 G4	SB C4 200/190	SR 125 600/900/1200	SRF 125 600/900/1200	KOM 125	KR 125	C 125
VUE 100 P mini

BIM

VENTS VUT 100 P mini