VENTS VUT 530 EH

Description

DESCRIPTION

The VUT EH air handling units with an electric heater are used in ventilation and air conditioning systems in commercial, office and other public or industrial premises that require an economical solution and a controlled ventilation system.

CASING

The casing is made of aluzinc steel with 25 mm thick mineral wool heat- and sound-insulating layer.

FILTER

FANS

The units are equipped with supply and exhaust centrifugal double-inlet fans with forward curved blades and built-in thermostat with automatic restart.

HEAT EXCHANGER

HEATER

AUTOMATION AND CONTROL SYSTEM

The unit incorporates an integrated automation and control system with a multi-functional control panel with LCD display.
The standard delivery set includes 10 m connection cable for connection to the remote control panel.

CONTROL AND PROTECTION FUNCTIONS

Control from the control panel: switching on/off, speed selection, timer, faults.
Maintaining the set room temperature by the sensor on the control panel – smooth heating capacity control.
Three-speed fan speed control (low-medium-high).
Unit operation according to daily and week schedule (timer adjustable from the control panel).
Safe start-up/shutdown of the fans.
Electric heater overheating protection by the temperature sensor installed in the supply air duct and by two overheating thermostats, one thermostat activated at 60 °C with automatic reset and another thermostat activated at 90 °C with manual reset. Blowing of the heating elements for heat removing at the end of the heating cycle.
Filter clogging control by engine filter time.

MOUNTING

The unit is designed for indoor mounting.
While mounting the unit provide the correct condensate collection and drainage.
Access for the unit servicing and filter cleaning is from the side panels on the left from supply air side.

Characteristics

Parameter	VUT 530 EH	Measurement unit
Frequency	50/60	Hz
Phase	1	˜
Voltage	230	V
Electric heater power	4000	W
Maximum fan power	2 pcs. x 150	W
Electric heater current	17.4	A
Air capacity	530	m³/h
Total unit power	4300	W
Total unit current	18.72	A
Fan current	2 pcs. x 0.66	A
RPM	1100	min^-1
Maximum transported air temperature	-25...+40	°С
Sound pressure level at 3 m distance	28-47	dBА
Heating	electric heating	-
Casing material	aluzinc	-
Insulation	25 mm mineral wool	-
Filter: extract	G4	-
Filter: supply	G4	-
Connected air duct size	160, 100	mm
Heat recovery efficiency	up to 88	%
Weight	49	kg
Heat exchanger type	cross-flow	-
Heat exchanger material	polystyrene	-
SEC Class	E	-
Type	supply and exhaust with heat recovery	-
Mounting	floor mounting	-

Capacity diagram

Operating point

Files archieve

Downloads

Dimensions

Characteristics

Additional characteristics

Designation key

Series	Rated air flow [m³/h]	Heater type	Duct connection
VENTS VUT	350; 500; 530; 600; 800; 1000; 1500; 2000	E: electric	H: horizontal

Accessories