VENTS ZVP 100

Description
Characteristics
Downloads
Dimensions
Determining duct air flow / air velocity inside the air duct

Description

APPLICATION
ZVP probes are designed to measure air flow in air ducts.	Operating on the pitot tube principle, ZVP probes measure the total and static pressure values, which allows calculating air flow.
DESIGN
The special profile of the probe neutralises the influence of back eddies, which can affect the static pressure measurement. The precisely calculated number and positioning of the nozzles gives the highest possible accuracy of 98% already at 1 m/s.	The simple design makes it easy to install the probes yourself. The sealed seat prevents air leaks.

Characteristics

Parameter	ZVP 100	Measurement unit
Weight	0.062	kg

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
L	115	mm
L1	99	mm
A	15	mm

Determining duct air flow / air velocity inside the air duct

ZVP probes operate on the pitot tube principle. The total pressure P_total is measured on one of the surfaces of the probe. The static pressure P_stat is measured on the opposite side. The difference between these pressures is velocity pressure P_vel, which is expressed by the following formula:

P_vel. = ½ x ρ x v²

P_vel. = velocity pressure in Pa

ρ – density of the gas (air) in kg/m³

v – velocity in m/s

Air volume can be determined with this formula:

Q = KV x √dP

Q – air volume in l/s

KV – KV value

dP – pressure difference measured by the ZVP probe in Pa

Determining duct air flow

Determining air velocity inside the air duct