Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS BELIMO СM230/СM24

VENTS BELIMO СM230/СM24

The SM series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m² installed in various ventilation and air conditioning systems.

Model features
  • Electrical accessories
  • Description
  • Modifications
  • Downloads
Description
Description
APPLICATION DESIGN
  • The SM series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m² installed in various ventilation and air conditioning systems.
  • The actuator is installed directly on the damper axis and locked with a special spindle clamp to prevent its turning-through.
  • The actuator overload protection stops the actuator once it reaches the end positions.
  • In case of installation of a magnet on the actuator housing the gear is disengaged and the damper changes into manual operation mode.
  • The turning angle is adjusted by mechanical end stops.
CONTROL
  • The CM24A, CM230 models are controlled by the three-point control system.
  • The damper is opened or closed by the single-circuit control.
Modifications
Modification name
+
+
Downloads
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"BELIMO СM230/СM24" product description 02-2020 (pdf 745.14Kb)
Download image "BELIMO СM230/СM24" for your website (png 556.52Kb)
Download high quality image "BELIMO СM230/СM24" (psd 1.82Mb)
Share your opinion

Questionnaire
Please evaluate our updated site user friendliness