VENTS BELIMO LM230A/LM24A
- Description
- Modifications
- Downloads
Description
Description
APPLICATION |
DESIGN |
- The SM series actuators with actuating torque 5 Nm are designed for controlling air dampers with cross section up to 1 m² installed in various ventilation and air conditioning systems.
|
- The actuator is installed directly on the damper axis and locked with a special spindle clamp to prevent its turning-through.
- The actuator overload protection stops the actuator once it reaches the end positions.
- In case of pressing the button on the actuator housing the gear is disengaged and the damper changes into manual operation mode.
- The turning angle is adjusted by mechanical end stops.
|
CONTROL |
- The LM24A, LM230A models are controlled by the three-point control system.
- The damper is opened or closed by the single-circuit control.
|