VENTS KV Series

Description

APPLICATION

The droplet separators are designed to remove condensed droplets from the air in the ventilation air ducts.
Designed for direct installation in a rectangular air duct.

MOUNTING

The droplet separator design ensures its mounting by means of flange connection.
The air flow direction shall match the pointer on the droplet separator.
Installation is carried out horizontally, with the condensate drain pan down.
The droplet separators are installed in the air duct system downstream of the coolers and heat exchangers.

DESIGN

The droplet separator casing is made of galvanised steel, which eliminates corrosion during the whole period of operation.
The drop separator profiles are made of special plastic, which delays the maximum possible number of droplets in the stream.
The frames have an optimal profile to minimize the loss of airflow pressure.
The droplet separator is equipped with a removable drain pan of stainless steel with anti-condensation insulation.
The drain pan is equipped with a 16 mm drain pipe, which can be installed both from left and right.

Modifications

Modification name

VENTS KV 400x200

VENTS KV 900x500

VENTS KV 600x350

VENTS KV 500x250

VENTS KV 1000x500

VENTS KV 700x400

VENTS KV 500x300

VENTS KV 800x500

VENTS KV 600x300

Downloads

Designation key

Series	Flange dimensions (width x height) [mm]
KV	400х200; 500х250; 500х300; 600х300; 600х350; 700х400; 800х500; 900х500; 1000х500

Diagram