VENTS VUE H EC Comfo air handling units with heat recovery

• The air handling unit VUE H EC Comfo is a fully-featured ventilation unit that ensures air filtration, fresh air supply and stale air extract.
• During operation the extract air heat is transferred to the supply air stream by the plate heat exchanger. 
• The units are used in ventilation and air conditioning systems installed in various premises.

• Due to applied EC-motors the unit energy demand is decreased by 1.5-3 times and noise level is lowered as well.
• All models are designed for connection to ø150, 160, 200 and 250 mm round air ducts.

• Made of aluzinc, internally filled with 25 mm mineral wool heat- and sound-insulating layer.

• Supply and extract air flows are purified through two panel filters with a filtering class G4.
• Optionally a supply F7 filter may be installed.

• The units are equipped with high-efficient EC-motors with an external rotor. 
• These state-of-the-art motors offer the very best in energy efficiency today.
• EC-motors are characterized with high performance and optimum control across the entire speed range.
• The high efficiency (up to 90 %) is a definite advantage of the electronically-commutated motors.

• The VUE 300 H EC Comfo and  VUE 400 H EC Comfo units are equipped with constant flow fans with forward curved blades.
• These fans provide constant set air flow even in case of variable air resistance in the ventilation system, i.e. in case of clogged filters.
• The VUE 800 H EC Comfo unit is equipped with fans with backward curved blades.

• The VUE H/EH EC Comfo units are equipped with a counterflow heat exchanger with an enthalpy membrane at the core.
• In the cold season the exhaust air heat and moisture are transferred to the supply air stream through the enthalpy membrane reducing the heat losses from ventilation.

• Consequently, it is the ambient air heat and moisture transferred to the exhaust air stream through the enthalpy membrane in the warm season.
• This allows for a considerable reduction of the supply air temperature and humidity which, in turn, reduces the air conditioning load. 

• The unit is equipped with a controller, A6 control panel with LCD display and a wireless remote control.

VUE H EC Comfo control functions:

• Switching the unit on and off
• Three fan speeds
• Each of those is individually adjustable for the supply and the exhaust fans
• There is a possibility of air damper connection
• Input for alarm signal from the fire fighting system
• Relay input for connection of a CO2 / humidity / IAQ or an other sensor that switches the unit to maximum speed
• Filter clogging control by motor hours
• Week-scheduled operation setting

• The unit is designed for wall mounting with a bracket, installation of the floor or suspended ceiling mounting.
• Any mounting position must enable condensate draining and removal.

• The filters are accessible for servicing and cleaning through the service panel that must be installed during the mounting stage on the left or on the right side.