Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Smoke extraction and ventilation 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents 
VENTS VDO series
Axial smoke extraction fans with air capacity up to 114 000 m³/h and fire resistance rating: 300 °C/2 hours; 400 °C/2 hours.
VENTS VPVO/VDO 1400 and 1600 mm series
Axial pressurization and smoke extraction fans.
Standard sizes 1400 and 1600 mm.
Standard sizes 1400 and 1600 mm.
VVGF-VO, VVGF-VO...400/2 flexible joint
Flexible joints cancel out any potential vibrations transmitted by the fans or air handling units to the air ducting as well as partially compensate for the air duct assembly deformations caused by temperature variation.
VK-VO inlet cone
The inlet cone should be installed upstream of the fan to improve the air flow parameters.
Backdraft damper KOM-VO, KOM-VO...400/2
The backdraft damper with spring-loaded blades is used for shutoff of air flow in the air ducts and prevention of air backdraft during standstill of ventilation equipment.
Backdraft damper KOM1-VO
The backdraft damper with a gravity plate is used for supply pressurisation systems and designed for shutoff of air flow during standstill of ventilation equipment.
Silencer SR
The silencer is used for attenuation of the operation noise generated by ventilation equipment and spreaded in the air ducts.
Silencer SRV
The silencer is used for attenuation of the operation noise generated by ventilation equipment and spreaded in the air ducts.
VVCp-VO spring-loaded anti-vibration mount
The spring-loaded anti-vibration mounts are used for attenuation of noise and vibration generated by ventilation equipment.
VVCr-VO rubber anti-vibration mount
The rubber anti-vibration mounts are used for attenuation of noise and vibration generated by ventilation equipment.
