Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS 150 MAV (120/60)

    VENTS 150 MAV (120/60)
    • VENTS 150 MAV (120/60)
    • Text
    • Text
    photo-zoom
    Print versionSave in PDF format
    Maximum capacity - 268.44 m3/h.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Downloads
    • Options
    • Dimensions
    • Additional diagrams
    Description
    Description
    APPLICATIONS  
    • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
    • Ventilation shaft mounting or duct connection.
    • Low to medium air flow motion for short distances at low air resistance.
    • Compatible with 100, 125 and 150 mm air ducts.
    DESIGN  
    • Modern design and aesthetic look.
    • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
    • The intellectual impeller design makes the fan efficiency high and the service life long.
    • The fan is equipped with a thermal actuator that provides smooth opening and closing of the automatic louvre shutters to prevent back draft.
    • Protection rating IP 24.
    MOTOR  
    • Reliable and low-watt electric motor.
    • Designed for continuous operation and requires no maintenance.
    • Equipped with overheating protection.
    CONTROL  

    Manual:

    • The fan is controlled by a room light switch. It is not included in the delivery package.
    • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
    • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.

    Automatic:

    • By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
    • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
    • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating with in the time period according to the timer setting, then shuts down).
    • By the motion sensor and the timer TP (in case of motion detection the fan switches automatically on and operates within the set time period from 2 to 30 minutes. The motion sensitivity area is up to 4 meters and the maximum detection angle is 100°.
    MOUNTING FEATURES  
    • The fan is mounted directly into the ventilation shaft.
    • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
    • Fixed to the wall by self-tapping screws.
    • Suitable for ceiling mounting.
    • Flange of 92 mm length for easy mounting into concrete walls and floor decks up to 100 mm thick.
    • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
    MOUNTING EXAMPLE  
     
     
    Characteristics
    Characteristics
    Parameter Value Measurement unit
    Engine Type 120В / 60Гц -
    Voltage 120 V
    Frequency 60 Hz
    Power consumption 35.2 W
    Air capacity 269 m³/h
    Pressure 49 Pa
    Current 0.4 A
    Sound pressure level at 3 m 42 dBА
    Spigot size 150 mm
    Design axial -
    Duct diameter 150 mm
    IP Code IP 24 -
    Type exhaust -
    Mounting wall mounting , ceiling mounting -
    Files archieve
    Downloads
    Modifications
    Modifications
    Modification name Pull-cord switch
    VENTS 150 MAV (120/60)
    +
    Dimensions
    Characteristics
    VENTS 150 MA (120/60)
    Parameter Value Measurement unit
    Ø D 150 mm
    B 212 mm
    B1 196 mm
    B2 150 mm
    H 195 mm
    L 114 mm
    L1 33 mm
    Additional diagrams
    Additional diagrams


    Legend
    Legend
    Picture symbol   Designation   Modification description
      MA L   The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
      МA turbo   High-powered motor.
      MA press   5-blade low-noise impeller with improved aerodynamics for higher fan capacity.
      МA 12   Modification with low-voltage motor. 12 V AC power supply.
      MAT   Equipped with a regulated timer with the operating time from 2 to 30 minutes.
      MATH   Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%.
      MAV   Equipped with a pull cord switch.
      МAVТ   Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
      MAVТН   Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%.
      МAТР   Equipped with a regulated timer and a motion sensor with the sensitivity area from 1 to 4 m and the detection angle up to 100°).
    Example of installation
    Example of installation

    Accessories
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Please evaluate our updated site user friendliness