Polyvent 620

Description

DESCRIPTION	FEATURES
Flexible polyurethane air duct with high-carbon steel wire frame.	Extremely high wear resistance, durability, air tightness, low pressure losses. Heavy-flammable. The ideal solution for application in woodwork and timber industry and for removal of air mixtures with high abrasive dust content. High resistance to solvent-, gasoline- and oil vapours. UV- and ozone resistance. Suitable for handling of hot gases (up to +120 °С).
RECOMMENDED APPLICATION
Applied in industrial ventilation systems, the ideal solution for application in woodwork and timber industry, car service and fuel stations, oil refineries. Used for removal of gas mixture with high abrasive dust content. Suitable for outside installation.

Characteristics

Parameter	Polyvent 620	Measurement unit
Range of sizes	Ø 102; 121; 127; 152; 165; 182; 203; 228; 254; 304	mm
Air duct base	Specially designed polyurethane film (250 μm)	-
Air duct wire	steel spring, 0.8-2 mm thick	-
Operating temperature range	-21 ... +110	°С
Standard length	6	m
Available lengths (cutting)	6	m
Air speed	30	m/s
Maximum operating pressure	3000	Pa

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Colour range

Transparent

(_)

Packing


Cardboard box		Unit coloured packing		Net

Order code

Accessories

Diffusers and air disk valves

Grilles and hoods

Pressure loss diagram

PRESSURE LOSS DIAGRAM PER 1 M STRETCHED AIR DUCT

Calculation example

Select a curve that matches the air duct diameter [mm], 200 mm in this case.
Find the intersection point of this line with the vertical line of the required air flow in m³/h, 500 m³/h in this case.
The horizontal line that shows the pressure loss in Pa per 1 m straight air duct crosses this intersection point.
Multiply pressure loss value (2.4 Pa/m at 20 °C) by total air duct length to get the total pressure loss value. To calculate pressure loss in case of bends consider each bend as extra air duct meter.

VENTS Polyvent 620