Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS TT Silent-M 150


Inline mixed-flow fans in sound- and heat-insulated casing with the air flow up to 555 m³/h.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional diagrams
  • BIM
  • Designation key
Description
Description
APPLICATION
  • New inline VENTS TT Silent-M fans are enclosed in a specially designed sound-insulated casing that ensures silent fan operation in combination with high aerodynamic characteristics.
  • The fans are compatible with round air ducts from Ø 100 up to 450 mm. 
  • The VENTS TT Silent-M fans combine wide capabilities and high performance characteristics of both axial and centrifugal fans, thus providing powerful air stream and high pressure.
  • The VENTS TT Silent-M fans are recommended as a component of the air handling systems for various commercial and industrial premises with high requirements to noise level, i.e. in libraries, conference halls, educational institutions, kindergartens, etc.
DESIGN
  • The external casing is made of polymer-coated steel.
  • The inner casing perforation let sound waves pass through the holes and fall at a specific angle to the sound-absorbing layer.
  • The casing is internally heat- and the sound-insulated with 50 mm mineral wool layer.
  • The specially perforated casing and sound-absorbing material provide sound attenuation in a broad frequency band.
  • The inner casing and the impeller are made of high-quality durable plastic.
  • Due to the conic impeller and special blade profiling the circumferential air speed increases thus providing higher air pressure and capacity as compared to standard axial fans.
  • The diffuser, the specially profiled impeller and the directing vanes at outlet from the fan casing distribute air flow in such a way as to attain the best combination of high performance and high pressure at low noise level. 
  • The fan casing is equipped with an airtight terminal box for connection to power mains.
MOTOR
  • Single-phase energy efficient double-speed motor with low energy demand.

  • The motor is equipped with thermal switches for the motor overheating protection. 

  • The ball bearings extend the motor service life up to 40 000 hrs. at non-stop operation.
  • The motor has IP X4 ingress protection rating.
CONTROL
  • The double-speed motors are controlled with a built-in switch («V»option) or an external switch for multi-speed fans (available upon separate order).
TT Silent-M fan with a three-position speed switch
  • A built-in speed controller (P option), an external TRIAC or autotransformer speed controller (available upon separate order) enable smooth motor speed control when connected to the maximum speed terminal.
  • T option models are equipped with an adjustable turn-off delay timer, adjustable from 2 to 30 minutes.
TT Silent-M fan with a built-in speed controller
MOUNTING
  • The fan may be mounted at any place and at any angle within the ductwork system.
  • Several fans may be installed in one system in parallel to attain higher air capacity or in series to increase operating pressure in the system.
  • The fan casing is equipped with fixing brackets for fastening to the floor, wall or ceiling.
THE FAN WITH ELECTRONIC MODULE OF THE TEMPERATURE SENSOR AND SPEED CONTROLLER («U» OPTION)
  • The ideal solution for ventilation of the premises with high demands to permanent temperature control e.g. greenhouses.
  • The fan with the electronic temperature and speed control module provides automatic control of motor speed (air capacity) depending on the air temperature in the air duct or in the room.
The front panel of the electronic module has the following control knobs:  
  • speed control knob for setting the motor speed; 
  • thermostat control knob for setting the temperature set point; 
  • thermostat indicator light.
The fan is available in two modifications:  
  • with a temperature sensor integrated inside the fan air duct (U/U1 option);
  • with an external temperature sensor fixed on the cable, 4 m long (Un / U1n option).
CONTROL LOGIC OF THE FAN WITH THE ELECTRONIC TEMPERATURE AND SPEED CONTROL MODULE
  • Set the desired air temperature (set point of the thermostat) with the thermostat control knob. Set the required minimum impeller speed (air flow) with the speed control knob. The motor switches to maximum speed (maximum air flow) as the temperature reaches and exceeds the set temperature set point. 
  • The motor switches to the pre-set lower speed as the temperature drops down below the set temperature point. To avoid the frequent motor speed changes, e.g. when the temperature in the supply air duct is equal to the threshold value, the switching delay time is activated. 
There are two switch delay control logics for various cases: 
  • The temperature sensor-based switch delay (U option): the motor switches to higher speed as the air temperature exceeds 2°C above the set thermostat set point. The motor revers to the pre-set lower speed as the air temperature drops below the thermostat set point. This control logic is used to keep air temperature to within 2°C. In this case the motor speed switches are rare.
  • The timer-based switch delay (U1 option): as the air temperature exceeds the set thermostat set point, the motor switches to higher speed and the switch delay timer is activated for 5 minutes. The motor reverts to lower speed as the air temperature drops down below the thermostat set point and only after the delay timer countdown. This pattern is used for exact air temperature control. The speed switches for the fan with U1 option are more frequent as compared to the fan with U option, however the minimum operating cycle at one speed is 5 minutes.
Characteristics
Characteristics
Parameter TT Silent-M 150
min
TT Silent-M 150
max
Measurement unit
Speed min max -
Phase 1 1 ˜
Voltage 230 230 V
Frequency 50/60 50/60 Hz
Fan power 45 52 W
RPM 1970 2645 min-1
Current 0.20 0.23 A
Maximum air capacity 405 555 m³/h
Max. transported air temperature 60 60 °С
Sound pressure level at 3 m Sound pressure level at 3 m 26 33 dBА
Protection rating IP X4 IP X4 -
Duct diameter 150 150 mm
Sound- and heat-insulated casing yes yes -
Casing material polymer coated steel polymer coated steel -
Weight 6.1 6.1 kg
SEC Class C C -
Duct for round air ducts for round air ducts -
Type supply and exhaust supply and exhaust -
Mounting floor mounting, wall mounting, ceiling mounting, Inline floor mounting, wall mounting, ceiling mounting, Inline -
* To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS TT Silent-M" user's manual 05-2022 (V97EN-05) (pdf 3.83Mb)
"VENTS TT Silent-M" product description 05-2022 (pdf 1.5Mb)
Download image "VENTS TT Silent-M (ErP 2015, 2016, 2018)" for your website (png 413.03Kb)
Download high quality image "VENTS TT Silent-M (ErP 2015, 2016, 2018)" (psd 3.98Mb)
"TT-M, TT-MD, TT-MD EC, TT Silent-M, TT Silent-MD, TT Silent-MD EC" user's manual 06-2018 (V135EN-03) (pdf 3.41Mb)
"VENTS TT Silent-M 200" user's manual 11-2023 (V97-2EN-01) (pdf 2.52Mb)
Dimensions
Characteristics
VENTS  TT Silent-M 150
Parameter Value Measurement unit
∅D 147 mm
B 247 mm
B1 274 mm
H 260 mm
L 580 mm
Additional diagrams
Additional diagrams

Low speed Gen. Octave-frequency band [Hz] LpA, 3 m dBA LpA, 1 m dBA
Sound-power level dBA 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBA 59 32 49 55 53 52 38 28 15 38 48
LwA to outlet dBA 62 36 41 44 61 53 44 44 29 41 51
LwA to environment dBA 46 37 40 41 40 38 29 22 19 26 36

 

High speed Gen. Octave-frequency band [Hz] LpA, 3 m dBA LpA, 1 m dBA
Sound-power level dBA 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBA 68 37 58 65 62 61 44 33 18 48 58
LwA to outlet dBA 66 38 43 47 65 57 47 47 31 45 55
LwA to environment dBA 53 44 47 48 47 45 34 26 23 33 43
BIM
BIM

Designation key
Designation key
Series Air duct diameter Options
VENTS TT
Silent-M
100; 125; 150; 160;
200; 250; 315; 355; 400; 450
Т: off-delay timer adjustable from 2 to 30 minutes.
U: speed controller with electronic thermostat and temperature sensor integrated into the air duct. Equipped with power cord and IEC C14 electric plug. Temperature-based operation logic.
Un: speed controller with electronic thermostat and external temperature sensor fixed on 4 m cable. Equipped with power cord and IEC C14 electric plug. Temperature-based operation logic.
U1: speed controller with electronic thermostat and temperature sensor integrated into the air duct. Equipped with power cord and IEC C14 electric plug. Timer-based operation logic.
U1n: speed controller with electronic thermostat and external temperature sensor fixed on 4 m cable. Equipped with power cord and IEC C14 electric plug. Timer-based operation logic.
R: power cord with IEC C14 electric plug.
V: three-position speed switch.
P: built-in smooth speed controller and power cord with IEC C14 electric plug.
ErP data
Overall efficiency ƞ, (%)
Measurement category MC
Efficiency category EC
Efficiency grade N
Variable speed drive VSD
Power kW
Current А
Air flow m3/h
Static pressure Pa
Speed n/min-1
Specific ratio SR
Share your opinion

Questionnaire
Is our site helpful for your business development?