Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

Vents 100 CF 12

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Wiring plan
  • Legend
  • Example of installation
Description
Description
APPLICATIONS  
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Designed for high-resistance ventilation duct systems.
  • Compatible with 100 mm air ducts.
DESIGN  
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The easy to use removable grille with a filter element protects the fan internal components against grease and dust penetration and makes it suitable for kitchen exhaust ventilation.
  • The basic CF fan modification includes a dust filter. Aluminium grease filter configurations are also available (CFA model).
  • The centrifugal fan impeller has forward curved blades for high pressure and low noise levels.
  • Protection rating IP 24.
MOTOR  
  • Reliable and low-watt single-phase electric motor.
  • The basic motor modification includes plain bearings.
  • The „turbo“ modification includes the motor equipped with ball bearings mounted on specially designed vibration dampers.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.
CONTROL  

Manual:

  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same regulator unit. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.

Automatic:

  • By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
MOUNTING FEATURES  
  • Suitable for external or built-in mounting.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to the wall by self-tapping screws or fixing brackets.
  • Suitable for ceiling mounting.
  • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
MOUNTING EXAMPLES  
  Wall surface mounting Wall flush mounting  
 
Characteristics
Characteristics
Parameter Vents 100 CF 12
Measurement unit
Voltage 12 V
Frequency 50/60 Hz
Power consumption 24 W
Air capacity 110 m³/h
Current 3 A
RPM 2300 min-1
Sound pressure level at 3 m 37 dBА
Weight 1.2 kg
Spigot size 100 mm
Engine Type 12V / 50-60Hz -
Design centrifugal -
Duct diameter 100 mm
IP Code IP 24 -
Type exhaust -
Mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Certificate GS "CF" (pdf 263.03Kb)
"VENTS CF" user's manual 10-2011 (V18EN-02) (pdf 1.53Mb)
"VENTS CF" product description 09-2015 (pdf 848.61Kb)
Declaration of сonformity "CF,CF turbo" (pdf 2.12Mb)
Download high quality image "VENTS CF" (psd 2.87Mb)
Download image "VENTS CF" for your website (png 622.68Kb)
Dimensions
Characteristics
Vents 100 CF 12
Parameter Value Measurement unit
Ø D 100 mm
B 180 mm
H 195 mm
L 132 mm
L1 59 mm
L2 73 mm
L3 26 mm
Wiring plan
Wiring plan
Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
Wiring diagram for the fans with grounding  
 

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment
  • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
  • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.
Legend
Legend
Picture symbol   Designation   Modification description
    CFА   Fan with an aluminium grease filter.
  CF 100 turbo   High-powered motor. The motor is equipped with ball bearings for long service life (appr. 40  thousand hours) and mounted on specially designed vibration mounting. The bearings are maintenance-free and contain enough grease for the entire operating period.
  CF 100 Т   Equipped with a regulated timer with the operating time from 2 to 30 minutes.
  CF 100 TH   Equipped with a  timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%.
  CF 100 V   Equipped with a pull cord switch.
  CF 100 VТ   Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
  CF 100 VТН   Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%.
  CF 100 ТР   Equipped with a regulated timer and a motion sensor with the sensitivity area from 1 to 4 m and the detection angle up to 100°.
  CF 100 12   Modification with low-voltage motor. 12 V AC power supply.
Example of installation
Example of installation

Share your opinion

Questionnaire
Is our site helpful for your business development?