VENTS Quiet-Mild 100 Duo

Print version Save in PDF format

Two-speed axial low-noise and low energy fans for exhaust ventilation with air flow up to 90 m³/h.

Add to project

Add to compare

3D model

Gallery

Description
Characteristics
Capacity diagram
Downloads
Modifications
Dimensions
Legend

Description

APPLICATION
Innovative exhaust fan with stylish design. Ideal for intermittent or continuous ventilation of bathroom, showers, kitchens and other utility spaces. Two-speed ventilation up to 170 m³/h.	Permanent low-speed operation mode ensures continuous minimum air exchange in the room. Ventilation shaft mounting or connection to Ø 100 and 125 mm air ducts.
COLOUR MODIFICATIONS

DESIGN
The casing and the impeller of the fan are made of high-quality durable plastic, UV resistant. The aerodynamic design of the impeller ensures high air flow and low noise level. The compact design enables wall and ceiling installation. A shortened spigot for mounting into a ventilation shaft or direct connection to Ø 100 mm and 125 mm air ducts.	The fan is equipped with a specially designed backdraft damper to prevent back flow and heat losses during the fan standby. The fan outlet pipe incorporates specially designed air rectifiers to reduce air turbulence, noise level and increase air pressure. High ingress protection rating makes the fan the ideal bathroom ventilation solution. The electronic components are protected with tight covers.
MOTOR
Low energy demand from 4 W due to a new two-speed high-efficient motor on ball bearings. Maintenance-free bearings contain enough grease for 40 000 hrs continuous operation.	The motor on special anti-vibration dampers for vibration absorbing and silent operation. The motor is equipped with overheating protection.
OPERATION MODES OF THE FANS WITH MODIFICATIONS T, TH:
The fan operates at Speed 1 by default. The fan switches to Speed 2 when the switch is closed or the humidity sensor is activated.
CONTROL
Manual: The fan is controlled by a room light switch. It is not included in the delivery set. The fan is controlled with a built-in pull cord switch "V". This option is not applicable for ceiling mounting. Speed control with a thyristor speed controller or a P2-1-300 speed switch, see Electrical Accessories. Several fans may be connected to the same controller. Speed controllers cannot be connected to the T and TH fan modifications.	Automatic: Speed control with a BU-1-60 electronic control unit, refer to Electric accessories. The control unit is supplied separately. By the timer T. The built-in turn-off delay timer enables fan operation at high speed within 2 to 30 minutes after the fan switching of. By the humidity sensor and timer TH. If the humidity level in the room exceeds the sensor threshold within 60-90 %, the fan switches automatically to a high speed and operates until the humidity level drops to the standard level. After that, the fan continues operating within the set time period and then reverts to the standard operation mode with the low speed.
MOUNTING FEATURES
The fan is mounted directly into the ventilation shaft. Flexible duct connection is recommended in case of the remote ventilation shaft location. The air duct is connected to the fan exhaust spigot through a clamp.	Fixing to wall with screws.

Characteristics

Parameter	VENTS Quiet-Mild 100 Duo min	VENTS Quiet-Mild T 100 Duo min	VENTS Quiet-Mild TH 100 Duo min	VENTS Quiet-Mild V 100 Duo min	VENTS Quiet-Mild 100 Duo max	VENTS Quiet-Mild T 100 Duo max	VENTS Quiet-Mild TH 100 Duo max	VENTS Quiet-Mild V 100 Duo max	Measurement unit
Speed	min	min	min	min	max	max	max	max	-
Voltage	230	230	230	230	230	230	230	230	V
Frequency	50/60	50/60	50/60	50/60	50/60	50/60	50/60	50/60	Hz
Power consumption	4	4	4	4	7.5	7.5	7.5	7.5	W
Air capacity	60	60	60	60	90	90	90	90	m³/h
Current	0.029	0.029	0.029	0.029	0.052	0.052	0.052	0.052	A
Sound pressure level at 3 m	22	22	22	22	25	25	25	25	dBА
Weight	0.55	0.55	0.55	0.55	0.55	0.55	0.55	0.55	kg
Design	axial	axial	axial	axial	axial	axial	axial	axial	-
Duct diameter	100	100	100	100	100	100	100	100	mm
IP Code	IP 45	IP 45	IP 45	IP 45	IP 45	IP 45	IP 45	IP 45	-
Type	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	-
Mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Modifications

Modification name
VENTS Quiet-Mild 100 Duo
VENTS Quiet-Mild T 100 Duo
VENTS Quiet-Mild TH 100 Duo
VENTS Quiet-Mild V 100 Duo

Modification name	Humidity sensor	Timer	Pull-cord switch	Interval timer
VENTS Quiet-Mild 100 Duo	-	-	-	-
VENTS Quiet-Mild T 100 Duo	-		-
VENTS Quiet-Mild TH 100 Duo			-	-
VENTS Quiet-Mild V 100 Duo	-	-		-


+
+
+
+

Dimensions

Characteristics

Parameter	Value	Measurement unit
Ø D	99	mm
B	158	mm
H	136	mm
L	81	mm
L1	26	mm

Legend

PICTURE SYMBOL	DESIGNATION	MODIFICATION DESCRIPTION
	Quiet-Mild T	Modification with a turn-off delay timer and an interval timer (integrated function of automatic ventilation activation). Once in 6, 14 or 24 hours the fan is switched on for up to 30 minutes to ventilate a premise with the low speed. On elapsing of the set turn-off delay time the fan switches off automatically.
	Quiet-Mild TH	Modification with a turn-off delay timer (delay time from 2 to 30 min) and a humidity sensor with an adjustable threshold from 60 to 90 %.
	Quiet-Mild V	Modification with a pull cord switch.

* VENTS Quiet-Mild 100 Duo and VENTS Quiet-Mild 125 Duo with modifications T and TH are supplied with an integrated turn-on delay timer to avoid unnecessary switching of the fan if you use your bathroom shortly and frequently.
After humidity increases or after signalling from the external switch, the fan switches to a higher speed not immediately, but after a set time period (1 min).