VENTS VKH 6D 560

• Exhaust ventilation system for various premises suitable for roof mounting.
• Compatible with Ø 200-630 mm air ducts.
• Suitable for any roof types as well as vertical ventilation shafts.

• 2-, 4- or 6-pole single- or three-phase asynchronous motors with an external rotor and impeller with backward curved blades.
• The motor is equipped with thermal overheating protection with automatic restart as well as ball bearings for long service life.
• For precise features, safe operation and low noise, each turbine is dynamically balanced while assembly.
• Motors protection rating IP44, IP54.

• Both smooth or step speed control is performed by means of the thyristor or autotransformer controller.
• Several fans can be connected to one controller in case the total power and operating current do not exceed the rated controller values.

• The fan casing is made of steel with polymeric coating (VENTS VKH models), aluminum (VENTS VKHA), galvanized steel (VENTS VKHz).

• The fan is mounted on the roof directly above the ventilating duct or shaft and is firmly fixed to the flat surface by means of a connecting plate.
• While mounting VKH fans directly onto the flat roof a supporting block shall be provided to prevent water and snow drops into the vent of the ventilation shaft.
• Electrical connection and installation shall beperformed in compliance with the manual and circuit diagram on the terminal box.
• For connection of the fans to round air ducts use the following accessories: KKV damper, GVK flexible connector, FKV counter flange.
• For mounting of the fans to flat surface use the mounting frame RKV.

VKH fan store roof ventilation example