Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUE 250 H mini


Air handling unit in compact sound- and heat-insulated casing with horizontal duct connections. Maximum air flow – 260 m³/h

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Designation key
  • Accessories
Description
Description
DESCRIPTION CASING
  • The air handling units are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.
  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.
  • The casing of the unit is made of aluzinc steel, internally filled with 20 mm mineral wool heat- and sound-insulating layer.
MODIFICATIONS
  • VUT 250 H mini A12: models with horizontal duct connections, fans with AC motors with polystyrene heat exchanger.
  • VUE 250 H mini A12: models with horizontal duct connections, fans with AC motors with a heat exchanger made of enthalpy.
FILTER FANS
  • Two built-in filters with filtering class G4 provide efficient supply and extract air filtration.
  • F8 filter is available as an option for supply air filtration.
  • The unit is equipped with a supply and exhaust centrifugal fan with backward curved blades and integrated overheating protection thermostat with automatic restart.
  • The motors and the impellers are dynamically balanced.
 
HEAT EXCHANGER 
  • VUT mini: plate heat exchanger made of polystyrene.
  • Whenever heat recovery is not required for unit operation, the heat exchanger block can be easily replaced by a summer block.
  • To prevent the heat exchanger freezing, electronic protection system is applied.
  • It switches the supply fan off as the temperature sensor requires.
  • VUE mini: plate heat exchanger made of enthalpy with heat recovery efficiency up to 78 %.
  • The applied heat exchanger enables not only heat but also humidity recovery, which helps maintaining a comfortable humidity level.
  • To prevent the heat exchanger freezing, electronic protection system is applied.
  • It switches the supply fan off as the temperature sensor requires.
CONTROL INSTALLATION
  • The unit is equipped with the A12 (SRS-1) control panel.
  • Speed and rotation control of the single-phase power-controlled motors allows turning the unit on/off and controlling its capacity.
  • Mounting to wall, floor or ceiling with fixing brackets.
  • While mounting provide free access to the service panel for filter replacement and servicing.
  • The correct mounted unit must provide condensate collecting and drainage.
Characteristics
Characteristics
Parameter VUE 250 H mini
Measurement unit
Frequency 50/60 Hz
Phase 1 ˜
Voltage 230 V
Maximum unit power 126 W
Maximum unit current 0.6 A
Sound pressure level at 3 m distance 28-47 dBА
Air capacity 260 m³/h
RPM 2700 min-1
Humidity recovery efficiency 27...45 %
Transported air temperature -25 ... +40 °С
Heat recovery efficiency 52...73 %
Casing material aluzinc -
Insulation 20 mm mineral wool -
Filter: extract G4 -
Filter: supply G4, * F8 PM2.5 81 % -
Heat exchanger type cross-flow -
Heat exchanger material enthalpy -
Duct for round air ducts -
Connection diameter 125 mm
Mounting floor mounting, wall mounting, ceiling mounting -
Option* -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS VUT/VUE 250 V/H mini" product description 01-2023 (pdf 894.98Kb)
Download high quality image "VENTS VUT(VUE) 250 H mini (ErP 2016)" (psd 3.02Mb)
Download image "VENTS VUT(VUE) 250 H mini (ErP 2016)" for your website (png 262.91Kb)
"VENTS VUT(VUE) 250 V(H) mini A12 / A1" user's manual 12-2023 (V25EN-06) (pdf 8.22Mb)
Dimensions
Characteristics
VENTS VUE 250 H mini
Parameter Value Measurement unit
∅D 125 mm
B 300 mm
H 443 mm
H1 43 mm
L 713 mm
L1 810 mm
Designation key
Designation key
Series Rated air flow [m³/h] Spigot modification Model Casing colour Integrated automation system
VUT: ventilation with heat recovery
VUE: ventilation with energy recovery
250 H: horizontal mini _: aluzinc
White: white painted
А12: control panel (SRS-1)
Accessories
Accessories
Model G4 panel filter F8 panel filter Silencers Back valves Air dampers Clamps Summer blocks
VUT 250 H mini A12 SF 240x184x40 G4 SF 240x184x40 F8 SR 125 SRF 125 KOM 125 KR 125 C 125 VL C4 200/240
VUE 250 H mini A12
Share your opinion

Questionnaire
Basic parameter for domestic fan selection