VENTS VUTR VE EC air handling units with heat recovery

Description

DESCRIPTION

The VUTR VE EC air handling units are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extraction.
Used in ventilation that require an economical solution and a controlled ventilation system.

CASING

Made of polymer-coated steel, internally filled with a mineral wool heat- and sound-insulating layer.

KITCHEN HOOD

All units are equipped with a 5th spigot for connection of a kitchen hood (see the «Application options» section).
The distinctive feature of the VUTR 200 VE2 EC unit is the ability to connect a KH-1 kitchen hood (available upon separate order) directly to the unit.

FILTER

MOTOR

The units are equipped with high-efficient EC motors with an external rotor and a centrifugal impeller.
These state-of-the-art motors offer the very best in energy efficiency today.

ROTARY HEAT EXCHANGER

Unit equipped with a rotary heat exchanger.
As compared to plate heat exchangers, the rotary heat exchangers are distinguished with no condensate forming, ability to maintain comfortable air humidity and extremely low freezing danger.

HEATER

Units are equipped with an electric heater.
The heaters are equipped with protecting devices to ensure safe and reliable operation of the unit.

MOUNTING

The unit is designed for wall or floor mounting.
The access for unit and filter maintenance is available from the front panel.
The service and the back panels can be rearranged allowing connection both on the right and on the left side.

AUTOMATION

The VUTR V(2)E EC 21 units are equipped with an integrated control system.
The A21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems).
To control the unit using a mobile application via Wi-Fi, you need to download the VENTS Home mobile application.

CONTORL AND AUTOMATION

Functions	A21
Control via Wi-Fi using a mobile application	+
Control via a wired remote control panel	А22 (option)
Control via a wireless remote control panel	А22 Wi-Fi (option)
Control via a wired remote LCD control panel	А25 (option)
BMS	RS-485 Wi-Fi Ethernet MODBUS (RTU, TCP)
Service Vents Cloud Server	+
Speed selection	+
Filter replacement indication	according to hour meter readings
Alarm indication	full alarm description in the mobile application
Week-scheduled operation	+
Timers	+
Boost mode	+
Fireplace mode	+
Reheater connection	integrated in E models, external reaheater cannot be connected
Cooler connection	option
Kitchen hood connection	option
Minimum supply air temperature control	+
Humidity control	option
CO₂ controller	option
VOC controller	option
Fire alarm sensor connection	option
*Option. The functionality is available when you purchase the appropriate accessory.

APPLICATION OPTIONS

Modifications

Modification name

VUTR 200 V2E EC

VUTR 280 VE EC

VUTR 400 VE EC

VUTR 600 VE EC

Downloads

Designation key

Series	Heat exchanger type	Rated air flow [m³/h]	Mounting type	Insulation thickness	Heater type	Motor type	Control panel
VENTS VUT	R: rotary	200; 280; 400; 600	V: vertical	_: 40 mm 2: 20 mm	E: with an electric heater	ЕС: synchronous motor with electronic control	A21

Accessories