Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Smoke extraction and ventilation 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents 
The duct temperature sensors are designed for installation in the air duct and temperature measurement of the air flow in the ventilation and air conditioning systems.
The SM series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m² installed in various ventilation and air conditioning systems.
The temperature regulator is designed for chimney fan control and applied for hot air distribution from chimney to the premises VENTS KAM T1, VENTS KAM Eco T1, VENTS KAM EcoDuo T1.
Speed control provides not only the best ventilation mode for periodically visited premises but considerable reduction of energy consumption.
The pressure differential switch is used to determine air rarefaction or air (non-aggressive gases) pressure drop.
The thermostats with bridging contacts are designed for regulation of air temperature, temperature of liquids and gases and are widely used in electric water heaters, dishwashing and clothe washing machines, drying machines, electric furnaces, etc.
The triac controller is designed for control of electric heaters power output.
Frequency speed controllers are the energy saving devices which ensure maximum utilization of actuator power with minimum energy consumption.
Applied for temperature mode control in ventilation, heating and air conditioning systems.
Applied for smooth speed control of EC motors with the control input 0-10 V.
Applied in ventilation systems for turning the fans on/off and speed switch of multi-speed fan motors.
The duct temperature sensors are designed for installation in the air duct and temperature measurement of the air flow in the ventilation and air conditioning systems.
The triac controller is designed for control of electric heaters power output.
Applications
The SM series actuators with actuating torque 5 Nm are designed for controlling air dampers with cross section up to 1 m2 installed in various ventilation and air conditioning systems.
Applied for control of the set indoor temperature as well as ventilation and air conditioning systems control.
Applied for speed ON/OFF switching and speed selection in the fans with multi-speed motors.
Applied in ventilation systems for switching ON/OFF and speed controlling of single-phase power-controlled motors.
Speed control enables not only selecting the comfortable ventilation mode for the periodically visited premises but reducing the energy consumption for the ventilation.
The duct temperature sensors are designed for installation in the air duct and temperature measurement of the air flow in the ventilation and air conditioning systems.
The TF series actuators with actuating torque 2 Nm are designed for controlling air dampers with cross section up to 0.4 m².
Applied for temperature mode control in ventilation, heating and air conditioning systems.
Applied in ventilation systems for speed switching ON/OFF and speed control of the single-phase power-controlled motors.
Applied for speed ON/OFF switching and speed select switching in the fans with multi-speed motors.
The duct temperature sensors are designed for installation in the air duct and temperature measurement of the air flow in the ventilation and air conditioning systems.
The LF series actuators with actuating torque 4 Nm are designed for controlling air dampers with cross section up to 0.8 m² installed in various ventilation.
Applied in ventilation systems for speed switching ON/OFF and speed control of the single-phase power-controlled motors.
The outdoor temperature sensor is designed for outdoor temperature measurement in ventilation and air conditioning systems.
The outdoor temperature sensor is designed for outdoor temperature measurement in ventilation and air conditioning systems.
Applied in ventilation systems for speed switching ON/OFF and speed control of single-phase power-controlled motors.
The duct sensors are used jointly with PULSER-M temperature controllers.
Applied in ventilation systems for switching ON/OFF and speed controlling of single-phase power-controlled motors.
