Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS iFan Wi-Fi series

VENTS iFan Wi-Fi series
Intellectual axial fan with an integrated Wi-Fi module for exhaust ventilation with air flow up to 133 m³/h.
Model features
  • Wi-Fi
  • For household application
  • Intellectual fans
3D model
Gallery
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Certificates
Description
Description
APPLICATION  
  • Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises.
  • Intellectual integrated control functions allow adjusting personal settings for the most balanced microclimate.
DESIGN  
  • Specially designed motor and aerodynamically optimized impeller shape provide super silent operation at only 17 dBA, which is combined with high air performance.

  • Due to replaceable spigots the fan is suitable for mounting with Ø100 or Ø125 mm air ducts.

  • Front panel 3D design and rich colour palette of replaceable decorative panels give zest to the most refined interior.
  • The motor-impeller block is easy to remove without special tools which grants easy servicing.

  • The fan has an ultra-thin casing with a thickness of only 29 mm without a spigot.
  • The fan is equipped with an integrated on/off power slide switch for quick disconnection from power mains.
MOTOR  
  • Reliable motor on ball bearings with minimum energy demand up to 6 W.
  • The bearings are maintenance-free and are filled with grease for the whole motor service life.
  • The fan is powered through an integrated pulse power supply unit with a wide power supply range from 100 to 240 V and 50 to 60 Hz.
  • The fan is suitable for application in various countries and has stable operation in versatile power mains.
  • The motor is installed on a rubber anti-vibration connector for vibration absorbing and silent fan operation.
  • The motor is equipped with overheating protection.
MODIFICATIONS  
Model with intellectual humidity control and automatic heat distribution. Model with intellectual humidity control, automatic heat distribution and extra motion sensor control.
OPERATION MODES  
  • The operating mode for the iFan Wi-Fi fan can be selected using an application for Android or iOS.

 24 HOURS MODE / Non-stop ventilation

  • Silent – permanent low-speed operation mode. If the humidity changes, the fan switches to a higher speed (MAX mode). The fan is switched to Silent mode after signal from the motion sensor or external switch.
  • Do not disturb – the function is only available when the 24 hours mode is activated. This function allows for setting the time interval so that the fan will not respond to sensors or switch actuation, and will operate at minimum speed (Silent).

 TIMER / Turn-on and turn-off delay timers

  • Turn-on delay timer allows to delay switching to a higher speed by 2 or 5 minutes after sensor activation.
  • Turn-off delay timer is designed to prolong the fan operation for 5, 15, 30 or 60 minutes in the mode caused by sensor activation or Boost mode activation.

 Automatic interval ventilation

  • Automatic interval ventilation (function is only available when the 24 hours mode is deactivated). This mode allows ventilating the room every 12 hours for 30 minutes at the set speed.

 Silent mode

  • The fan runs at Silent speed. The speed can be adjusted in the range from 30 % to 100 % of the fan maximum performance.

 Max (Boost Mode)

  • The fan runs at Max speed. The speed can be adjusted in the range from 30 % to 100 % of the fan maximum performance.

 HUMIDITY SENSOR / Humidity control adjustment

  • The fan has an integrated intelligent humidity sensor with the following operation modes:
  • Manual mode allows setting the humidity threshold in range from 40 % to 80 %. If this threshold is exceeded, the fan turns on or switches to higher speed.
  • Auto – intelligent humidity control. This mode provides for humidity threshold change and fan speed selection in automatic mode. The fan independently selects the optimum humidity threshold for the room in which it is installed. Fan operation algorithm is selected based on analysing the statistical data of indoor humidity level.
  • Automatic operation based on temperature sensor. If the air temperature exceeds the set point, the fan will switch to Max speed and will return to the previous mode only after indoor temperature drops by 4 °C below the set point.

 MOTION SENSOR / Motion sensor (for the iFan Move Wi-Fi model)

  • When the motion sensor is activated, the turn-on delay timer is switched on. Then the fan will switch to Silent speed. Once there is no motion detected, and after turn-off delay time the fan will switch to standby mode.
DECORATIVE FRONT PANEL COLOURS*  
Melange Silver Ruby Star Violet Topaz Graphite Black Sapphire

 

*decorative front panels are available upon separate order

Modifications
Modification name
Humidity sensor
Timer
Ball bearing motor
Interval timer
Wi-Fi
Motion sensor
-
+
+
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Downloads
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS iFan Wi-Fi" product description 03-2018 (pdf 1.46Mb)
"VENTS iFan Wi-Fi" user's manual 10-2023 (V168EN-03) (pdf 2.11Mb)
Download high quality image "VENTS iFan Wi-Fi" (psd 2.21Mb)
Download image "VENTS iFan Wi-Fi" for your website (png 498.62Kb)
"VENTS iFan Wi-Fi" product description 05-2018 (pdf 1.22Mb)
"VENTS iFan Wi-Fi" connection guide 02-2020 (V168-1EN-01) (pdf 840.3Kb)
Certificates
Certificates
<p>
	Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).</p>

Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).

<p>
	Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST.</p>

Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST.

<p>
	Insulation class: double insulation.</p>

Insulation class: double insulation.

<p>
	Equipment protection rating.</p>

Equipment protection rating.

CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer). CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer).
<p>The EurAsian Conformity mark is a certification mark to indicate that the products conform to all technical regulations of the Eurasian Customs Union.</p>

The EurAsian Conformity mark is a certification mark to indicate that the products conform to all technical regulations of the Eurasian Customs Union.

Share your opinion

Questionnaire
Basic parameter for domestic fan selection