Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | Fan current | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | Number of poles | Frequency | Current | Power | Air capacity | IP Code | Sound pressure level at 3 m | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Current | Engine Type | Frequency | Protection rating | Frequency | SEC Class | Power | Maximum pressure | SEC Class | Motor protection rating | Duct diameter | Voltage | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | PM 2.5 filtration efficiency | High-power version | SEC class* | Backdraft damper | Number of intake spigots | Sound- and heat-insulated casing | Low-powered motor | Casing height | Grille is available | Size | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | 230 | - | - | 846 | - | 66 | 25 +40 | IP X4 | 6.28 | - | - | - | - | - | - | 160 | 1 | 2 | 60 | - | - | - | - | - | - | - | - | - | - | 725 | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 120 | - | - | 520 | - | 58 | - | - | - | - | - | - | - | - | - | 200 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | 380.7 | - | - | 120В / 60Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 400 | - | - | 730 | 1455 | 41 | - | IP 54 | 17 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 200-277 | 250 | - | - | - | 44 | - | IP X4 | 29.3 | - | - | 1450 | - | 3830 | 3639 | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 355 | - | yes | - | - | aluzinc , aluminium | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 1.1 | -25 +60 | - | - | - | no | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - |
50 Hz | - | 1~230 | 112 | - | 485 | 2465 | 52 | - | IP X4 | 6.5 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 150 | - | - | - | - | galvanized steel , ABS plastic | - | - | for round air ducts | centrifugal | ceiling mounting | - | - | - | 0.5 | -25 +50 | - | - | - | - | - | - | - | yes | - | - | no | - | - | - | - | - | - | - | - | |
60 Hz | - | 1~230 | 136 | - | 531 | 2550 | 53 | - | IP X4 | 6.5 | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 150 | - | - | - | - | galvanized steel , ABS plastic | - | - | for round air ducts | centrifugal | ceiling mounting | - | - | - | 0.6 | -25 +50 | - | - | - | - | - | - | - | yes | - | - | no | - | - | - | - | - | - | - | - | |
- | - | 230 | 94.8 | - | - | 3200 | 35 | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | 50/60 | 0.77 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 160 | - | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | - | -25 +60 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | 425 | - | - |
- | - | 230 | - | - | 360 | 1300 | 25 | - | IP X4 | 13.96 | - | - | - | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | E | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.29 | - | - | - | 31 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | 400 | 230 | - | - | 920 | 57 | - | IP 24 | 14.0 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4900 | - | - | - | 0.58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 400 | 281 | - | - | 1015 | 57 | - | IP 24 | 14.0 | - | - | - | - | - | - | - | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5430 | - | - | - | 0.59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 400 | - | - | 6185 | 2652 | 54 | - | IP 54 | 65 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3145 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 48 | - | - | 1430 | 37 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | 5.2 | - | - | - | - | - | - | - | - | C | - | - | - | - | 125 | - | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | - | - | 0.22 | 50 | - | - | - | - | - | - | - | - | 1 | - | - | 141 | no | - | - | - | 242 | - | - |
50 Hz | - | 220-240 | 295 | - | 1920 | 2720 | 54 | - | IP X4 | 8.8 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 1.34 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | 220-240 | 413 | - | 1980 | 2780 | 55 | - | IP X4 | 8.8 | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 1.8 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | 440 | - | - | - | - | - | - | - | - | - | 1.23 | - | 978 | 52 | - | - | - | - | 6 | - | - | - | - | IP X4 | - | 400 | - | - | 52 | 3 | - | 50 | - | - | - | - | - | - | - | - | - | IP54 | - | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 6000 | - | - |
60 Hz | 599 | - | - | - | - | - | - | - | - | - | 1.32 | - | 1125 | 54 | - | - | - | - | 6 | - | - | - | - | IP X4 | - | 400 | - | - | 52 | 3 | - | 60 | - | - | - | - | - | - | - | - | - | IP54 | - | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 6122 | - | - |
- | - | - | 354 | - | 3060 | 2470 | - | - | IP X4 | - | - | 1.57 | - | - | - | - | - | 1 | - | - | - | - | - | - | 45 | - | - | - | 97 | - | - | - | - | - | 50/60 | - | - | - | - | - | - | IP44 | 355 | 220-240 | - | - | - | galvanized steel | - | - | for round air ducts | - | exhaust | Inline | - | - | 850 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | -25 ... +55 | - | - | - |
- | 95 | - | - | - | - | - | - | - | - | - | - | 0.8 | 2478 | 47 | - | - | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 7 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | polymer coated steel | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 1350 | IP55 | - |
- | - | 230 | 76 | - | 305 | - | 63 | 55 | IP X4 | 4.1 | - | - | - | - | - | - | 125 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | 333.8 | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 104 | 563 | - | 60 | 25 +55 | IP X4 | 7.2 | - | - | - | - | - | - | 150 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | 481.3 | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 200-277 | - | - | - | - | 49 | - | - | 20 | - | - | 2600 | - | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | 1.72 | - | - | IPX4 | - | - | 391 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20 … +60 | 3100 | IP54 | - |
- | - | 230 | 98 | - | 555 | - | 41 | - | IP X4 | 10.5 | - | - | 2705 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 150 | - | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.43 | -25...+55 | - | - | no | no | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - |
- | - | 400 | 1150 | - | - | 890 | 58 | - | IP X4 | 56 | - | - | - | - | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 700 | 400 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 2.3 | - | - | - | - | - | - | - | - | - | - | no | - | - | - | - | - | -20 … +70 | 4050 | - | - |
50 Hz | - | 220-240 | 65 | - | 273 | - | 56 | - | IP 44 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | 335 | - | - | - | - | - | - | - | polymer coated steel | - | - | - | - | supply | for chimney | - | - | - | 0.29 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 120 | - | - | - | - | - |
60 Hz | - | 220-240 | 81 | - | 282 | - | 57 | - | IP 44 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | 435 | - | - | - | - | - | - | - | polymer coated steel | - | - | - | - | supply | for chimney | - | - | - | 0.35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 120 | - | - | - | - | - |
- | - | 1~230 | 460 | - | 4400 | 1340 | 57 | - | IP X4 | - | - | - | - | - | - | - | - | 1 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | - | - | - | - | polymer coated steel | - | - | - | - | Inline | - | - | - | 2 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 230 | 83 | - | - | 3400 | 45 | - | IP X4 | 3.2 | - | - | - | - | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 125 | - | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | - | 0.58 | -25 +60 | - | - | no | - | - | no | - | - | - | - | - | - | - | - | - | - | 480 | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | 400 | 148 | - | 3500 | 900 | 53 | - | IP X4 | 9.1 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 400 | 175 | - | 3580 | 1050 | 53 | - | IP X4 | 9.1 | - | - | - | - | - | - | - | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | 57 | - | IP X4 | - | - | 0.83 | - | - | - | - | - | - | - | - | - | 103 | - | - | - | 230 | 480 | 3600 | 3.6 | 1 | - | 50 | - | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 400 | 1308 | - | 4290 | - | - | - | IP X4 | 36.0 | - | - | 3160 | - | - | - | - | 3 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | 2.35 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | -25 +50 | - | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Please evaluate our updated site user friendliness